JIA-HONG HUANG (黃嘉宏), Ph.D.
OFFICE ADDRESS
Department of Engineering and System Science
National Tsing Hua University
101, Section 2, Kuang Fu Road Hsinchu, Taiwan 300
Republic of China
Phone: (886)35715131 ext. 34274
FAX: (886)35720724
E-mail: jhhuang@ess.nthu.edu.tw
HOME ADDRESS
49, 3F West Yuan
National Tsing Hua University
101, Section 2, Kuang Fu Road
Hsinchu, Taiwan 300
Republic of China
Phone: (886)35723916
Year and Place of Birth: 1958, Taipei, Taiwan, R.O.C.
Experience
National Tsing Hua University Positions Held:
Aug 2012- Now
Distinguished Professor, Department of Engineering and System Science, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.
Aug 2012 – July 2014
Director, Interdisciplinary Program of Nuclear Science, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.
March 1997 –July 2012
Professor, Department of Engineering and System Science, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.
August 1994 - March 1997
Professor, Department of Nuclear Engineering and Engineering Physics, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.
September 1989 - July 1994
Associate Professor, Department of Nuclear Engineering, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.
Other Related Professional Experiences:
Oct 2013- Now
Member of Editorial Board, Vacuum, Elsevier.
June 2004- July 2004
Visiting Professor, Department of Physics and Materials Science, City University of Hong Kong, Hong Kong.
July 2002 - Jan 2003
Research Scholar, Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, U.S.A.
March 2002 – April 2002
Visiting Professor, Department of Physics and Materials Science, City University of Hong Kong, Hong Kong.
September 1999 – Now
Member of Board of Trustee, Taiwan Association of Coating and Thin Film Technology
July 1997 - August 1998
Research Scholar, Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, U.S.A.
回到頂端Aug.1985 - Oct. 1989
University of Illinois at Urbana-Champaign, U.S.A.
Ph.D. in Materials Science and Engineering.
Thesis: Internal Hydrogen-Induced Subcritical Crack Growth in Stainless Steels.
Sept.1982 - June 1984
National Tsing Hua University, Taiwan, R.O.C.
M.S. in Materials Science and Engineering.
Thesis: A Study of High Strength Al-Li Alloy.
Oct. 1976- June 1980
National Tsing Hua University, Taiwan, R.O.C.
B.S. in Materials Science and Engineering.
回到頂端Courses Taught
Undergraduate:
Introduction to Materials Science
Thermodynamics of Materials
Physical Metallurgy (I)(II)
Mechanical Behavior of Materials
Introduction to Thin Film Engineering
Graduate:
Defects in Crystals
Advanced Physical Metallurgy
回到頂端Main Research Projects
Thin Film and Coatings Technology(1994-20013)
A. TiN and TiNxOy Coatings using PVD Methods (1994-2009)
(1) Microstructure and Hardness of TiN Thin Films on Stainless Steel by HCD Ion-Plating (1994-1995)
(2) The Optimization of Coating Process for TiN on Stainless Steel by HCD Ion Plating Using Taguchi Method(1995-1996)
(3) Study of Adhesion of TiN on Stainless Steel Using Periodical Cracking Method (1995-1996)
(4) Study of Corrosion Behavior and Mechanical Properties of TiN on AISI D2 Steel by HCD Ion Plating (1996-1997)
(5) Effect of HCD-IP Processing Parameters on the Microstructure and Preferred Orientation of TiN Thin Film on Stainless Steel (1997-1998)
(6) Effect of HCD-IP Processing Parameters on the Corrosion Behavior and Adhesion of TiN Thin Film on Stainless Steel (1997-1998)
(7) Ion-Beam-Assisted Deposition (IBAD) of TiN Thin Film on Si(001) Substrate - Fabrication and Characterization (1997-1998). Research performed in University of Illinois at Urbana-Champaign, USA.
(8) Effect of HCD-IP Processing Parameters on the Microstructure and Mechanical Properties of TiN Thin Film on Stainless Steel (1998-1999)
(9) The Effect of Controlling Film Thickness and Incident Ion Direction on the Structure and Properties of TiN Thin Film Grown by Ion-Plating (1999-2000)
(10) Optimization of the Deposition Process of TiN Thin Films by Magnetron Sputtering Using Design of Experiment Method (2001-2002)
(11) Effect of Residual Stress on the Texture Evolution of TiN Thin Film by IBAD (2002-2003) Research performed in University of Illinois at Urbana-Champaign, USA.
(12) Study on Structure and Properties of Nanocrystalline TiN Thin Film on Si (100) by Unbalanced Magnetron Sputtering (2002-2004)
(13) Synthesis and Characterization of Nanocrystalline TiNxOy Thin Films by Unbalanced Magnetron Sputtering (2004-2011)
(14) Measurement of Fracture Toughness on TiN Hard Coatings (2012-2014)
B. ZrN and ZrNxOy Coatings using PVD Methods (2000-2011)
(1) Using Experimental Design Method to Study the Effect of Processing Parameters on the Properties of ZrN Thin Film.(2000-2001)
(2) Effect of Processing Parameters on the Corrosion Properties of ZrN-Coated Stainless Steel(2000-2001)
(3) Effect of Bias on the Mechanical Properties and Microstructure of ZrN Thin Film(2001-2002)
(4) Effect of Nitrogen Partial Pressure and Film Thickness on the Properties and Microstructure of ZrN Thin Film (2002-2003)
(5)Synthesis and Characterization of Nanocrystalline ZrNxOy Thin Films by Ion-Plating (2004-Now)
(6) Study of Oxidation Behavior of ZrN Thin Films in Vacuum and Controlled Atmosphere (2010-2012)
Hydrogen Embrittlement in Zirconium and Titanium Alloys (1989-1997)
A. Zirconium Alloys (1989-1994)
(1) Study on Hydriding Behavior of Zr-2 and Zr-4 (1989-1990)
(2) Study of Hydrogen Embrittlement on Zirconium Alloys (1990-1991)
(3) Study of Delayed Hydride Cracking on Zirconium Alloys (1991- 1992)
(4) Study on Mechanical Properties of Zirconium Alloy in Hydrogen Gas(1992-1993)
(5) Study on Cracking of Hydrided Zirconium Alloy in Hydrogen gas (1993-1994)
B. Titanium Alloy (1994-1997)
(1) Study of Hydrogen Embrittlement on Titanium Alloys (1994-1995)
(2) Study on Mechanical Properties of Titanium Alloys in Hydrogen Gas (1995-1996)
(3) Study of Hydrogen-Induced Subcritical Crack Growth in Ti-6Al-4V Alloy (1996-1997)
Duplex Stainless Steel(1992-1994)
Study of Thermal Aging Embrittlement and Lifetime Assessment on Recirculation Elements in Nuclear Power Plant (1992-1994)
回到頂端Honors
June 1980 Member of The Honor Society of Phi Tau Phi.
Sept. 1989 Member of The Honor Society of Phi Kappa Phi.
1995-1999 Inclusion in Marquis WHO'S WHO IN THE WORLD 13th,14th,15th, and 17th editions.
June 1997 Fellowship for Advanced Study of National Science Council of Republic of China
Dec. 1997 Inclusion in Marquis WHO'S WHO IN SCIENCE AND ENGINEERING 4th edition.
1998-2001 Inclusion in Marquis WHO'S WHO IN AMERICA 53th,54th,55th, and 56th editions.
June 2002 Teaching Excellence Award, National Tsing Hua University, Hsinchu, Taiwan.
Sept. 2003 Distinguished Service Award, Taiwan Association of Coating and Thin Film Technology.
Dec. 2004 Inclusion in Marquis WHO'S WHO IN SCIENCE AND ENGINEERING 8th edition.
Dec. 2007 Inclusion in Marquis WHO'S WHO IN ASIA 1st edition.
Feb. 2008 Inclusion in “2000 Outstanding Scientists 2008/2009 of the 21st Century-Inaugural Edition by International Biographical Center, Cambridge, England.
Sept. 2009 Teaching Excellence Award, National Tsing Hua University, Hsinchu, Taiwan.
Sept. 2012 Teaching Excellence Award, National Tsing Hua University, Hsinchu, Taiwan.
Aug. 2012 Distinguished Professor, National Tsing Hua University, Hsinchu, Taiwan.
Nov. 2012 Distinguished Service Award, Taiwan Association of Coating and Thin Film Technology
PROFESSIONAL MEMBERSHIP:
Member of The Chinese Institute of Mining and Metallurgical Engineers since Mar. 1979.
Member of The Metallurgical Society of AIME since Nov. 1985.
Member of The American Society of Metals since Nov. 1985.
Member of Chinese Society for Materials Science since Mar. 1990.
Member of The Corrosion Engineering Association of the Republic of China since June 1994.
Member of Taiwan Association of Coating and Thin Film Technology since Sept. 1999.
Member of American Vacuum Society (AVS) since May. 2013.
回到頂端A. Refereed Paper
1. J.H. Huang and S.C. Chang, (1985), "A Study of High Strength Al-Cu-Li Alloy (I), Alloy Preparation and Mechanical Properties", Chinese J. Mater. Sci., vol. 174, No. 2, pp. 45-52. (in Chinese)
2. S.C. Chang and J.H. Huang, (1986), "Fracture and Shear Band Formation in an Al-Cu-Li-Mg-Zr Alloy", Acta Metall., vol. 34, No. 8, pp. 1657-1662. (SCI,EI)
3. J.-H. Huang and C.J. Altstetter, (1991), "Internal Hydrogen-Induced Subcritical Crack Growth in Austenitic Stainless Steels", Metall. Trans. A, vol 22A, pp. 2605-2618. (SCI,EI)
4. J.-H Huang* and S.-P. Huang, (1992) "Evidence for Discontinuous Crack Growth in Delayed Hydride Cracking of a Zirconium Alloy", Scri. Metall. et. Mater., vol.27, pp. 1247-1251. (SCI,EI)
5. J.-H. Huang* and S.-P. Huang, (1993) "Hydriding of Zirconium Alloys in Hydrogen Gas", Mater. Sci. Eng. A, vol. 161, no. 2, pp. 247-253. (SCI,EI)
6. J.-H Huang*, S.-P. Huang and C.-S. Ho, (1993) "The Ductile-Brittle Transition of a Zirconium Alloy Due to Hydrogen", Scri. Metall. et. Mater., vol.28, pp. 1537-1542. (SCI,EI)
7. J.J. Shiao, C.H. Tsai, J.H. Huang and J.J. Kai, (1993) "Phase Transformation in Ferrite Phase of a Duplex Stainless Steel Aged at 500C", Scri. Metall. et. Mater., vol.29, pp. 1451-1456. (SCI,EI)
8. J.-H. Huang* and M.S. Yeh, (1993) "Effect of Hydrogen Gas on the Mechanical Properties of Hydrided Zircaloy-4", Proceedings of the Sixth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp. 475-481, San Diego, USA, 1993.(EI)
9. J.J. Shiao, C.H. Tsai, J.J. Kai and J.H. Huang,(1993) "The Composition Effects on the Degradation and Microstructure Evolution of Aged Duplex Stainless Steels", Proceedings of the Sixth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp. 391-398, San Diego, USA, 1993.(EI)
10. J.-H Huang* and S.-P. Huang,(1994) "Effect of Hydrogen Contents on the Mechanical Properties of Zircaloy-4", J. Nucl. Mater., vol.208, pp. 166-180. (SCI,EI)
11. J.-H Huang* and C.-S. Ho,(1994) "Effect of Hydrogen Gas on the Mechanical Properties of Zircaloy-4", Mater. Chem. Phys., vol.38, No. 2, pp. 138-145. (SCI,EI)
12. J.-H Huang*, S.-P. Huang and C.-S. Ho,(1994) "Reply to Comment on 'The Ductile-Brittle Transition of a Zirconium Alloy Due to Hydrogen'", Scri. Metall. et. Mater., vol. 30, pp. 1239-1240. (SCI,EI)
13. J.J. Shiao, C.H. Tsai, J.J. Kai, and J.H. Huang, (1994) "Aging Embrittlement and Microstructure Observation in a CF8 Duplex Stainless Steel Aged at 400C", Chinese J. Mater. Sci., vol.26, No. 2, pp. 118-127. (in Chinese)
14. J.J. Shiao, C.H. Tsai, J.J. Kai, and J.H. Huang, (1994) "Aging Embrittlement and Lattice Image Analysis in a Fe-Cr-Ni Duplex Stainless Steel Aged at 400C", J. Nucl. Mater., vol. 217, No. 3, pp. 269-278. (SCI,EI)
15. J.-H. Huang* and F.I. Jiang,(1994) "Cracking of a Hydrided Zirconium Alloy in Hydrogen", Proceedings of the Fifth International Conference on Hydrogen Effects on Material Behavior, N.R. Moody and A.W. Thompson eds, Jackson Lake Lodge, Moran, Wyoming, 1994, pp. 445-454.(EI)
16. C.-S. Mar, J.-H. Huang* and C.H. Tsai,(1994) "Life Time Prediction of Spent Fuel Cladding Using computer Code DATING", J. Chinese Corros. Eng., vol.8, No.2, p.55-65. (in Chinese)
17. J.-H. Huang and C.J. Altstetter,(1995) "Internal Hydrogen Embrittlement of a Ferritic Stainless Steel", Metall. Mater. Trans. A, vol. 26A, No. 4, pp. 845-849. (SCI,EI)
18. J.-H. Huang and C.J. Altstetter,(1995) "Cracking of Duplex Stainless Steel Due to Dissolved Hydrogen", Metall. Mater. Trans. A, vol. 26A, pp.1079-1085. (SCI,EI)
19. M.-S. Yeh and J.-H. Huang,(1996) "Hydrogen Embrittlement in Titanium Alloys", J. Chinese Corros. Eng. vol.10, No.3, pp.146-159.(in Chinese)
20. J.-H. Huang* and C.-S. Ho,(1997) "Subcritical Crack Growth Behavior for Hydrided Zircaloy-4 Plate", Mater. Phys. Chem. vol. 47, Nos.2-3, pp.184-192. (SCI,EI)
21. F.S. Shieu, Y.C. Sung, L.H. Cheng, J.H. Huang, and G.P.Yu, (1997)"Control of the Corrosion Resistance of TiN-Coated AISI 304 Stainless Steel", Corros. Sci. vol.39, No.5, pp.893-899. (SCI, EI)
22. M.-S Yeh and J.-H. Huang*,(1997) "Internal Hydrogen-Induced Subcritical Crack Growth in Ti-6Al-4V", Scri. Metall. Mater., vol. 36, No. 12, pp. 1415-1421. (SCI,EI)
23. F.S. Shieu, L.H. Cheng, Y.C. Sung, J.H. Huang, and G.P.Yu, (1997)" Characterization of the ion-plated TiN on AISI 304 stainless steel by energy filtering transmission electron microscopy", J. Vac. Sci. Technol A., vol. 15, No. 4, pp. 2318-2322. (SCI,EI)
24. F.S. Shieu, L.H. Cheng, Y.C. Sung, J.H. Huang, and G.P. Yu, (1997), “ Microstructure, Chemistry and Coating Properties of Ion-Plated TiN on Type 304 Stainless Steel”, Mater. Chem. Phys. vol. 50, No.3, pp. 248-255. (SCI,EI)
25. M.-S Yeh and J.-H. Huang*,(1998) " Hydrogen-Induced Subcritical Crack Growth in Ti-6Al-4V", Mater. Sci. Eng.A, vol. A242, pp. 96-107. (SCI,EI)
26. J.-H. Huang* and M.S. Yeh,(1998) “Gaseous Hydrogen Embrittlement of a Hydrided Zirconium Alloy”, Metall. Mater. Trans.A., vol. 29(3A), pp. 1047-1056. (SCI,EI)
27. C.T. Chen, Y.C. Song, G.-P. Yu and J.-H. Huang*,(1998) “Microstructure and Hardness of HCD Ion Plated Titanium Nitride Film”, J.Mater. Eng. Perform., vol. 7, pp. 324-328. (SCI,EI)
28. F.S. Shieu, L.H. Cheng, Y.C. Sung, J.H. Huang and G.P. Yu ,(1998) "Microstructure and Coating Properties of Ion-Plated TiN on Type 304 Stainless Steel", Thin Solid Films, vol. 334, pp. 125-132. (SCI,EI)
29. W.L. Pan, G.-P. Yu and J.-H. Huang*, (1998)“Mechanical Properties of Ion-Plated TiN Films on AISI D2 Steel", Surf. Coat. Technol. vol. 110, pp. 111-119. (SCI,EI)
30. B.F. Chen, W.L. Pan, J. Hwang, G.P. Yu and J.-H. Huang, (1999)“On the Corrosion Behavior of TiN-Coated AISI D2 Steel”, Surf. Coat. Technol. vol. 111, pp. 16-21. (SCI,EI)
31. J.-H. Huang*, C.-S. Lin, and Haydn Chen, (1999)"Ion Beam Assisted Deposition of TiN Thin Film on Si(100)", Mater. Chem. Phys. vol. 59, pp. 49-56. (SCI,EI)
32. B.F. Chen, J.Hwang, G.P. Yu and J.-H. Huang, (1999)”in situ Observation of the Cracking Behavior of TiN Coating on Stainless Steel Substrate Subjected to Tensile Strain”, Thin Solid Films, vol. 352, pp. 173-178. (SCI,EI)
33. J.-H Huang*, Y.-P. Tsai and G.-P. Yu, (1999)”Effect of Processing Parameters on the Microstructure and Mechanical Properties of TiN Film on Stainless Steel by HCD Ion Plating”, Thin Solid Films, vol. 355-356, pp. 440-445.(SCI,EI)
34. Jia-Hong Huang*, (2000)”The Mechanisms of Hydride-Induced Embrittlement in Materials”, Corrosion Study, No.12, pp.38-44.(in Chinese)
35. J.-H. Huang*, C.-H. Lin, C.-H. Ma and Haydn Chen, (2000)" Low Energy Ion Beam Assisted Deposition of TiN Thin Films on Silicon", Scripta Mater., vol. 42, pp. 573-579. (SCI,EI)
36. B.F. Chen, J. Hwang, I.F. Chen, G.P. Yu and J.-H. Huang,(2000) “A Tensile-Film-Cracking Model for Evaluating Interfacial Shear Strength of Elastic Film on Ductile Substrate”, Surf. Coat. Technol. vol. 126, pp. 91-95. (SCI,EI)
37. Jia-Yang Chen, Ge-Ping Yu and Jia-Hong Huang, (2000)”Corrosion Behavior and Adhesion of Ion-Plated TiN Film on AISI 304 Stainless Steel”, Mater. Chem. Phys., vol. 65, pp. 310-315 (SCI,EI)
38. C.-H. Ma, J.-H. Huang and Haydn Chen, (2000)” A Study of Preferred Orientation of Vanadium- and Zirconium-Nitride Coatings on Silicon Prepared by Ion Beam Assisted Deposition”, Surf. Coat. Technol, vol. 133-134, pp. 289-294 (SCI, EI)
39. Wei-Ren Gwan, Ge-Ping Yu and Jia-Hong Huang, (2000)”Study of Stress Corrosion Cracking of Alloy X-750 Components in Nuclear Power Reactor”, J. of Chinese Corros. Eng. vol. 14, pp. 9-16.(in Chinese)
40. Wei-Ding Wu, Kae-Jy Yu, Wei-Ren Gwan, Ge-Ping Yu and Jia-Hong Huang, (2000)”Study of Sensitization and Corrosion Behavior of Reactor Coolant Pump Steel”, J. of Chinese Corros. Eng. vol. 14, pp. 17-25.(in Chinese)
41. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang*, (2001)”Corrosion Behavior of TiN-Coated 304 Stainless Steel”, Corros. Sci., vol. 43, pp. 2023-2035. (SCI,EI)
42. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang*, (2001)”Deposition of TiN Thin Film on Si(100) by HCD Ion Plating”, Surf. Coat. Technol., vol.140, pp. 206-214. (SCI,EI)
43. Y.M. Chen, G.P. Yu and J.H. Huang, (2001)”Role of Process Parameters in the Texture Evolution of TiN Films Deposited by Hollow Cathode Discharge Ion Plating”, Surf. Coat. Technol., vol. 141, pp. 156-163.(SCI,EI)
44. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang*, (2002)”Mechanical Properties of TiN Thin Film Coated on 304 Stainless Steel Substrate”, Surf. Coat. Technol. vol. 149, pp. 7-13. (SCI,EI)
45. Y.M. Chen, G.P. Yu and J.H. Huang, (2002)”Comparison of Electrochemical Porosity Test Methods for TiN-Coated Stainless Steel”, Surf. Coat. Technol., vol. 150, pp. 309-318.(SCI,EI)
46. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang*, (2002)”Bias Effect of Ion-Plated Zirconium Nitride Film on Si(100)” Thin Solid Films, vol.405, pp.162-169. (SCI,EI)
47. Y.M. Chen, G.P. Yu and J.H. Huang, (2002)”Characterizing the Effect of Multiprocess Parameters on the Preferred Orientation of TiN Coating Using a Combined Index”, Vacuum, vol. 66, pp.19-25.(SCI,EI)
48. Y.M. Chen, G.P. Yu and J.H. Huang, (2002)”On the Porosity of TiN Films by HCD Ion Plating”, Surf. Coat. Technol., vol. 150, pp. 309-318(SCI,EI)
49. C. -H. Ma, J.-H. Huang and Haydn Chen, (2002)” Residual Stress Measurement in Textured Thin Film by Grazing Incidence X-ray Diffraction”, Thin Solid Films, vol. 418, pp. 73-78. (SCI,EI)
50. J.-H. Huang*, C.-Y. Hsu, S.-S. Chen and G.-P. Yu, (2003)”Effect of Substrate Bias on the Structure and Properties of Ion-Plated ZrN on Si and Stainless Steel Substrates”, Mater. Chem. Phys., vol.77, pp. 7-14.(SCI,EI)
51. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang*, (2003)”Corrosion Resistance of ZrN Films on 304 Stainless Steel Substrates”, Surf. Coat. Technol., vol. 167, pp. 59.67. (SCI,EI).
52. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang*, (2003)”Effect of Heat Treatment on the Structure and Properties of Ion-Plated TiN Film”, Surf. Coat. Technol., vol. 168, pp. 43-50. (SCI,EI).
53. Wen-Jun Chou, Chun-Hsing Sun, Ge-Ping Yu and Jia-Hong Huang*, (2003) “Optimization of the Deposition Process of ZrN and TiN Thin Film on Si (100) Using Design of Experiment Method”, Mater. Chem. Phys. vol. 82, pp. 228-236. (SCI, EI)
54. Cheng-Hsin Ma, Jia-Hong Huang and Haydn Chen, (2004) “Texture Evolution of Transition-Metal Nitride Thin Films by Ion Beam Assisted Deposition”, Thin Solid Films, vol. 446, pp.184-193. (SCI, EI)
55. Jia-Hong Huang*, Kiang-Wee Lau and Ge-Ping Yu, (2005)” Effect of Nitrogen Flow Rate on Structure and Properties of Nanocrystalline TiN Thin Film by Unbalanced Magnetron Sputtering”, Surf. Coat. Technol., vol. 191, pp.17-24. (SCI, EI)
56. Jia-Hong Huang*, Hao-Chung Yang, Xing-Jian Guo and Ge-Ping Yu, (2005)” Effect of Film Thickness on the Structure and Properties of Nanocrystalline ZrN Thin Film by Ion Plating”, Surf. Coat. Technol., vol. 195, pp.204-213. (SCI, EI)
57. Cheng-Hsin Ma, Jia-Hong Huang* and Haydn Chen, (2006)”Nanohardness of Nanocrystalline Transition-Metal Nitrides Thin Films”, Surf. Coat. Technol., vol. 200, pp.3868-3875(SCI, EI)
58. Jia-Hong Huang*, Kae-Jy Yu, P. Sit and Ge-Ping Yu, (2006)”Heat Treatment of Nanocrystalline TiN Films Deposited by Unbalanced Magnetron Sputtering”, Surf. Coat. Technol., vol. 200, pp.4291-4299. (SCI, EI)
59. Jia-Hong Huang*, Cheng-Hsin Ma and Haydn Chen, (2006) “Effect of Interlayer on the Residual Stress and Texture Development of TiN Thin Film”, Surf. Coat. Technol. vol. 200, pp.5937-5945.(SCI, EI)
60. Jia-Hong Huang*, Cheng-Hsin Ma and Haydn Chen, (2006) “Effect of Interlayer on the Residual Stress and Texture Development of TiN Thin Film by Unbalanced Magnetron Sputtering”, Surf. Coat. Technol. vol. 201, pp. 3199-3204.(SCI, EI)
61. Jia-Hong Huang*, Chi-Hsin Ho and Ge-Ping Yu, (2007)” Effect of Nitrogen Flow Rate on the Structure and Mechanical Properties of ZrN Thin Film on Si(100) and Stainless Steel Substrates”, Mater. Chem. Phys., vol. 102, pp. 31-38.(SCI, EI)
62. Jia-Hong Huang*, Kai-Hsuan Chang and Ge-Ping Yu, (2007) "Synthesis and Characterization of Nanocrystalline ZrNxOy Thin Films on Si by Ion Plating", Surf. Coat. Technol., vol.201, pp. 6404-6413. (SCI,EI)
63. Jia-Hong Huang*, Fan-Yi Ouyang and Ge-Ping Yu, (2007)" Effect of Film Thickness and Ti Interlayer on the Structure and Properties of Nanocrystalline TiN Thin Films on AISI D2 Steel", Surf. Coat. Technol., vol.201, pp. 7043-7053. (SCI,EI)
64. Jia-Hong Huang*, Zhang-En Tsai and Ge-Ping Yu, (2008) "Mechanical Properties and Corrosion Resistance of Nanocrystalline ZrNxOy Coatings on AISI 304 Stainless Steel by Ion Plating", Surf. Coat. Technol., vol. 202, pp. 4992-5000. (SCI,EI).
65. Q. Li, J. Xue, W. Liang, J.-H. Huang and J.K. Shang, (2008) “Enhanced Visible-Light Absorption in Heavily Nitrogen-Doped TiO2”, Phil. Mag. Lett., vol. 88, pp.231-238.(SCI,EI)
66. Hsiao-Ming Tung, Jia-Hong Huang, Ding-Guey Tsai, Chi-Fong Ai and Ge-Ping Yu, (2009) “Hardness and residual stress in nanocrystalline ZrN films: Effect of bias voltage and heat treatment”, Mater. Sci. Eng. A, vol. 500, pp. 104-108. (SCI,EI).
67. Pai-Yi Hsiao, Zhuo-Han Tsai, Jia-Hong Huang, and Ge-Ping Yu, (2009) “Strong Asymmetric Effect of Lattice Mismatch on Epilayer Structure in Metal Thin Film Deposition”, Phys. Rev. B, vol.79, 155414. (SCI, EI).
68. Yung-Hsien Wu, Lun-Lun Chen, Yuan-Sheng Lin, Chia-Husan Chang, Jia-Hong Huang, and Ge-Ping Yu, (2009) “Nonvolatile Memory with TiN Nanocrystals Three-Dimensionally Embedded in Si3N4 Formed by Spinodal Phase Segregation”, IEEE Electron Device Lett., vol.30, pp.617-619. (SCI, EI)
69. Jia-Hong Huang*, Tsan-Huang Wu and Ge-Ping Yu, (2009) “Heat Treatment Induced Phase Separation and Phase Transformation of ZrNxOy Thin Films Deposited by Ion Plating”, Surf. Coat. Technol., vol.203, pp. 3491-3500. (SCI, EI)
70. Yee-Lang Liu, Jia-Hong Huang, Ji-Jung Kai and Fu-Rong Chen, (2009) “Microstructure study of a nanocrystalline two phase ZrNxOy thin film”, Mater. Chem. Phys.,vol.116, pp. 503-506. (SCI, EI)
71. Jeh-Yin Chang, Ge-Ping Yu and Jia-Hong Huang*, (2009) “Determination of Young’s Modulus and Poisson’s Ratio of Thin Films by Combining sin2 X-ray Diffraction and Laser Curvature Methods”, Thin Solid Films, vol. 517, pp. 6759-6766.(SCI,EI)
72. C. P. Chuang, J. H. Huang, W. Dmowski, P. K. Liaw, R. Li, T. Zhang, and Y. Ren (2009) “The effect of hydrogen charging on Ln-based amorphous materials”, Appl. Phys. Lett., vol. 95, 241901. (SCI, EI).
73. Yu-Wei Lin, Jia-Hong Huang, and Ge-Ping Yu (2010)” Microstructure and corrosion resistance of nanocrystalline TiZrN films on AISI 304 stainless steel substrate”, J. Vac. Sci. Technol. A, vol. 28(4), pp.774-778.(SCI, EI)
74. Yu-Wei Lin, Jia-Hong Huang, and Ge-Ping Yu (2010)” Effect of nitrogen flow rate on properties of nanostructured TiZrN thin films produced by radio frequency magnetron sputtering”, Thin Solid Films, vol. 518, pp. 7308–7311. (SCI, EI).
75. Kuan-Che Lan, Jia-Hong Huang, Chi-Fong Ai and Ge-Ping Yu (2011)” Structure and properties of nanocrystalline ZrNxOy thin films: Effect of the oxygen content and film thickness”, J. Vac. Sci, Technol. A, vol. 29(3), No. 031506. (SCI, EI)
76. Andrew Chih-Pin Chuang, Yun Liu, Terrence J. Udovic, Peter K. Liaw, Ge-Ping Yu, and Jia-Hong Huang (2011)” Inelastic neutron scattering study of the hydrogenated (Zr55Cu30Ni5Al10)99Y1 bulk metallic glass”, Phys. Rev. B, vol. 83, No. 174206.(SCI, EI)
77. Jia-Hong Huang*, Yu-Ying Hu, and Ge-Ping Yu (2011)” Structure evolution and mechanical properties of ZrNxOy thin film deposited on Si by magnetron sputtering”, Surf. Coat. Technol., vol.205, pp. 5093-5102. (SCI, EI)
78. Jia-Hong Huang*, Tzu-Chun Lin, and Ge-Ping Yu (2011)” Phase transition and mechanical properties of ZrNxOy thin films on AISI 304 stainless steel”, Surf. Coat. Technol., vol.206, pp.107-116. (SCI, EI)
79. Shang-Jui Chiu, Yen-Ting Liu, Hsin-Yi Lee, Ge-Ping Yu, and Jia-Hong Huang (2011)”Growth of BiFeO3/SrTiO3 artificial superlattice structure by RF sputtering”, J. Crystal Growth, vol.334, pp. 90-95.(SCI,EI)
80. C.-P. Chuang, P. K. Liaw, J.-J. Kai, W. Dmowski, J.-H. Huang, and G.-P. Yu (2013) “High-Energy X-ray Diffraction Study of the Inhomogeneous Zr43Cu43Al7Ag7 Bulk-Metallic Glasses”, Adv. Eng. Mater., vol. 15, pp.287-294. (SCI, EI)
81. Shang-Jui Chiu, Yen-Ting Liu, Ge-Ping Yu, Hsin-Yi Lee, and Jia-Hong Huang (2013) ”The structure and ferroelectric property of La-doped BiFeO3/SrTiO3 artificial superlattice structure by rf sputtering: Effect of deposition temperature”, Thin Solid Films, vol. 529, pp. 85-88. (SCI,EI)
82. Shang-Jui Chiu, Yen-Ting Liu, Ge-Ping Yu, Hsin-Yi Lee, and Jia-Hong Huang (2013) “Enhancement of epitaxial LaNiO3 electrode on the ferroelectric property of La-doped BiFeO3/SrTiO3 artificial superlattice structure by rf sputtering”, J. Crystal Growth, vol.368, pp. 1-5.(SCI,EI)
83. Shang-Jui Chiu, Yen-Ting Liu, Hsin-Yi Lee, Ge-Ping Yu, and Jia-Hong Huang (2013) “Strain enhanced ferroelectric properties of multiferroic BiFeO3/SrTiO3 superlattice structure prepared by radio frequency magnetron sputtering”, Thin Solid Films, vol. 539, pp. 75-80. (SCI, EI)
84. An-NiWang, Ge-Ping Yu, and Jia-Hong Huang* (2014) “Fracture toughness measurement on TiN hard coatings using internal energy induced cracking”, Surf. Coat. Technol., vol. 239, pp. 20-27.(SCI, EI)
*Corresponding author
B. Conference Paper and Presentation
1. S.P Huang and J.H. Huang, "The Effect of Low Concentration Hydrogen on the Mechanical Properties of Zr-4", Proceedings of the 1991 Annual Conference of the Chinese Society for Materials Science, ROC, pp. 588-589. (in Chinese)
2. C.S Ho and J.H. Huang, "The Effect of Hydrogen Gas on the Mechanical Properties of Zr-4", Proceedings of the 1992 Annual Conference of the Chinese Society for Materials Science, ROC, pp. 126-127. (in Chinese)
3. M.S. Yeh and J.H. Huang, "The Metallographic Preparation of Zirconium alloy and Zirconium Hydride", Proceedings of the 1992 Annual Conference of the Chinese Society for Materials Science, ROC, pp. 128-129. (in Chinese)
4. M.S. Yeh and J.H. Huang, "Effect of Hydrogen Gas on Mechanical Properties of Hydrided Zircaloy-4", Proceedings of the 1993 Annual Conference of the Chinese Society for Materials Science, ROC, pp. 1-35-1-36. (in Chinese)
5. J.J. Shiao, C.H. Tsai, J.J. Kai and J.H. Huang, "Degradation and Phase Transformation of 500C Aging of CF8 Duplex Stainless Steels", Proceedings of the 1993 Annual Conference of the Chinese Society for Materials Science, ROC, pp. 1-135-1-136.
6. J.-H. Huang, S.-P. Huang and C.-S. Ho, "The Ductile- Brittle Transition of Zircaloy-4 Due to Hydrogen", Poster Session of 10th International Symposium on "Zirconium in the Nuclear Industry", Baltimore, USA, 1993.
7. J.-H. Huang and M.S. Yeh, "Effect of Hydrogen Gas on the Mechanical Properties of Hydrided Zircaloy-4", Proceedings of the Sixth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp. 475-481, San Diego, USA, 1993.
8. J.J. Shiao, C.H. Tsai, J.J. Kai and J.H. Huang, "The Composition Effects on the Degradation and Microstructure Evolution of Aged Duplex Stainless Steels", Proceedings of the Sixth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, pp. 391-398, San Diego, USA, 1993.
9. C.-S. Mar, J.-H. Huang and C.H. Tsai, "Life Time Prediction of Spent Fuel Cladding Using computer Code DATING", Proceedings of the Third Symposium on Fracture Science, ROC, 1994, pp. 125-130.(in Chinese)
10. F.I. Jiang and J.-H. Huang, "The Behavior of Delayed Hydride Cracking on Zircaloy-4", Proceedings of the 1994 Annual Conference of the Chinese Society for Materials Science, ROC, pp. 670-671.(in Chinese)
11. J.-H. Huang and F.I. Jiang, "Cracking of a Hydrided Zirconium Alloy in Hydrogen", Proceedings of the Fifth International Conference on Hydrogen Effects on Material Behavior, N.R. Moody and A.W. Thompson eds, Jackson Lake Lodge, Moran, Wyoming, 1994, pp. 445-454.
12. C.T. Chen, G.P. Yu and J.H. Huang, "Effect of Substrate Temperature on TiN Thin Films Deposited by HCD Ion Plating", Proceedings of the 1995 Annual Conference of the Chinese Society for Materials Science, ROC, pp. 254-255. (in Chinese)
13. C.-S. Mar and J.H. Huang, "Effect of Hydrogen Gas on the mechanical Properties of Ti-6Al-4V", Proceedings of the 1995 Annual Conference of the Chinese Society for Materials Science, ROC, pp. 144-145. (in Chinese)
14. J.-H. Huang and C.-S. Ma, "Effect of Hydrogen Gas on the Mechanical Properties of Ti-6Al-4V", in "Corrosion Prevention for Industrial Safety and Environmental Control", Proceedings of the 9th Asian-Pacific Corrosion Control Conference, S.L.I. Chan and W.T. Tsai eds, Pub. by Corrosion Engineering Association, ROC, 1995, pp. 315-320.
15. F.S. Shieu, L.H. Cheng, Y.C. Sung, J.H. Huang, and G.P.Yu, "A Study of the Thickness-Dependent Microstructure of the Ion-Plated TiN on AISI 304 Stainless Steel by Energy Filter TEM", Proceedings of the 1996 Annual Conference of the Chinese Society for Materials Science, ROC.
16. F.S. Shieu, Y.C. Sung, L.H. Cheng, J.H. Huang, and G.P.Yu, "Control of the Corrosion Resistance of TiN-Coated AISI 304 Stainless Steel", Proceedings of the 1996 Annual Conference of the Corrosion Engineering Association of the ROC.
17. C.T. Chen, Y.C. Song, G.-P. Yu and J.-H. Huang, "Microstructure and Hardness of Hollow Cathode Discharge Ion-Plated Titanium Nitride Film", Surface Engineering Symposium, Characterization of Coatings, Material Solutions '97, 1997, Indianapolis, Indiana, USA.
18. B.F. Chen, W.L. Pan, G.P. Yu, J. Hwang and J.H. Huang, "On the Corrosion Behavior of TiN-coated AISI D2 Steel", International Conference on Metallurgical Coatings and Thin Films, April 27-May 1, 1998, Town and Country Hotel, San Diego, California, USA.
19. J.-H. Huang, C.-H. Lin and Haydn Chen, "Ion Beam Assisted Deposition of TiN Thin Films on Silicon Substrates - Fabrication and Characterization", 100th annual meeting of The American Ceramic Society, May 3-6, 1998, Cincinnati, Ohio, USA
20. J.-H Huang, Y.-P. Tsai and G.-P. Yu, "Effect of Processing Parameters on the Microstructure and Mechanical Properties of TiN Film on Stainless Steel by HCD Ion Plating" , 26th International Conference on Metallurgical Coatings and Thin Films, 1999, Town and Country Hotel, San Diego, California, USA.
21. Jia-Yang Chen, Ge-Ping Yu and Jia-Hong Huang, "The Corrosion Behavior and Adhesion of Ion-Plated TiN Film on AISI 304 Stainless Steel" 26th International Conference on Metallurgical Coatings and Thin Films, 1999, Town and Country Hotel, San Diego, California, USA.
22. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang, "Mechanical Properties of TiN Thin Film Coated on 304 Stainless Steel Substrate" 27th International Conference on Metallurgical Coatings and Thin Films, 2000, Town and Country Hotel, San Diego, California, USA.
23. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang , "Corrosion Behavior of TiN-Coated 304 Stainless Steel" , 27th International Conference on Metallurgical Coatings and Thin Films, 2000, Town and Country Hotel, San Diego, California, USA.
24. C. –H. Ma, J.-H. Huang, Haydn Chen, "A Study of Preferred Orientation of Vanadium- and Zirconium-Nitride Coatings on Silicon Prepared by Ion Beam Assisted Deposition", 27th International Conference on Metallurgical Coatings and Thin Films, 2000, Town and Country Hotel, San Diego, California, USA.
25. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang, "The Effect of Controlling Film Thickness and Incident Ion Direction on the Structure and Properties of TiN Thin Film Grown by Ion Plating" , invited talk in the 2000 Annual Conference of the Chinese Society for Materials Science, ROC.
26. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang , "Bias Effect of Ion-Plated Zirconium Nitride Film on Si(100)" 28th International Conference on Metallurgical Coatings and Thin Films, 2001, Town and Country Hotel, San Diego, California, USA.
27. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang , "Corrosion Behavior of Zirconium Nitride Film Coated on 304 Stainless Steel" , 28th International Conference on Metallurgical Coatings and Thin Films, 2001, Town and Country Hotel, San Diego, California, USA.
28. J.-H. Huang, C.-Y. Hsu, S.-S. Chen and G.-P. Yu, " Effect of Substrate Bias on the Structure and Properties of Ion-Plated ZrN on Si and Stainless Steel Substrates" 28th International Conference on Metallurgical Coatings and Thin Films, 2001, Town and Country Hotel, San Diego, California, USA.
29. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang, " Effect of Heat Treatment on the Mechanical Properties of Ion-Plated TiN Film" 29th International Conference on Metallurgical Coatings and Thin Films, 2002, Town and Country Hotel, San Diego, California, USA.
30. Wen-Jun Chou, Ge-Ping Yu and Jia-Hong Huang, " Deposition of TiN Thin Films on Si(100) by Unbalanced Magnetron Sputtering" 29th International Conference on Metallurgical Coatings and Thin Films, 2002, Town and Country Hotel, San Diego, California, USA.
31. C.-H. Ma, J.-H. Huang, Haydn Chen, " New Residual Stress Measurement in Textured Thin Film by Grazing Incidence X-ray Diffraction" , 29th International Conference on Metallurgical Coatings and Thin Films, 2002, Town and Country Hotel, San Diego, California, USA.
32. C.-H. Ma, J.-H. Huang, Haydn Chen, " A Study on Texture Evolution of Transition Metal Nitride" , 29th International Conference on Metallurgical Coatings and Thin Films, 2002, Town and Country Hotel, San Diego, California, USA.
33. C.-H. Ma, J.-H. Huang and Haydn Chen,(2003) ”Control of Microstructure and Texture in Nanocrystalline Transition Metal Nitride Coatings by Ion-Beam-Assisted Deposition”, 30th International Conference on Metallurgical Coatings and Thin Films, 2003, Town and Country Hotel, San Diego, California, USA.
34. C.-H. Ma, J.-H. Huang and Haydn Chen,(2003) ”Nanohardness of Nanocrystalline Transition-Metal Nitride Coatings by Ion-Beam-Assisted Deposition”, 30th International Conference on Metallurgical Coatings and Thin Films, 2003, Town and Country Hotel, San Diego, California, USA.
35. S.M. Tung, J.-H. Huang and G.P. Yu,(2003) “Effect of Thickness on the Structure and Properties of Nanocrystalline Zirconium Nitride Thin Film by Unbalanced Magnetron Sputtering”, 30th International Conference on Metallurgical Coatings and Thin Films, 2003, Town and Country Hotel, San Diego, California, USA.
36. H.C. Yang, G.P. Yu and J.-H. Huang,(2003) “Effect of Film Thickness on the Structure and Properties of ZrN Thin Films Deposited on AISI 316 Stainless Steel by Ion Plating”, 30th International Conference on Metallurgical Coatings and Thin Films, 2003, Town and Country Hotel, San Diego, California, USA.
37. G.P. Yu, Y.M. Chen and J.-H. Huang,(2003) “Porosity and Corrosion of TiN-Coated Stainless Steel”, 30th International Conference on Metallurgical Coatings and Thin Films, 2003, Town and Country Hotel, San Diego, California, USA.
38. Y.M. Chen, G.P. Yu and J.-H. Huang,(2003) “The Modified Critical Passivation Current Density Method for Porosity Measurement of TiN Coatings Deposited on Stainless Steel”, 30th International Conference on Metallurgical Coatings and Thin Films, 2003, Town and Country Hotel, San Diego, California, USA.
39. Y.W Lin, J.-H. Huang and G.P. Yu,(2003) “Effect of Bias on the Structure and Properties of ZrN Thin Film by Unbalanced Magnetron Sputtering”, 30th International Conference on Metallurgical Coatings and Thin Films, 2003, Town and Country Hotel, San Diego, California, USA.
40. Jia-Hong Huang, Hao-Chung Yang and Ge-Ping Yu, (2004)” Effect of Film Thickness on the Structure and Properties of Nanocrystalline ZrN Thin Film by Ion Plating”, 31th International Conference on Metallurgical Coatings and Thin Films, 2004, Town and Country Hotel, San Diego, California, USA.
41. G.P. Yu, K.J. Yu and J.H. Huang, (2004)“Effect of Heat Treatment under Controlled Atmosphere on the Properties of TiN Film Deposited by Unbalanced Magnetron Sputtering”, 31th International Conference on Metallurgical Coatings and Thin Films, 2004, Town and Country Hotel, San Diego, California, USA.
42. Jia-Hong Huang*, Kae-Jy Yu, P. Sit and Ge-Ping Yu, (2004)"Heat Treatment of Nanocrystalline TiN Films Deposited by Unbalanced Magnetron Sputtering", Invited talk in The 3rd Asian Conference on Chemical Vapor Deposition, 12-14 November 2004, Taipei, Taiwan.
43. J.-H. Huang*, Fan-Yi Ouyang and Ge-Ping Yu (2005)"Effect of Film Thickness and Ti Interlayer on the Structure and Properties of Nanocrystalline TiN Thin Film Deposited by Unbalanced Magnetron Sputtering", 32th International Conference on Metallurgical Coatings and Thin Films, 2005, Town and Country Hotel, San Diego, California, USA.
44. Y.-W. Lin, J.-H. Huang and G.-P. Yu (2005)"The Effect of Bias on the Structure and Properties of ZrN Thin Films Deposited by UBM Sputtering", 32th International Conference on Metallurgical Coatings and Thin Films, 2005, Town and Country Hotel, San Diego, California, USA.
45. J.-H. Huang* (2005)" Residual Stress Measurement for Textured Thin Films Using GIXRD" Invited talk in the 2005 Annual Meeting of Taiwan Association of Coatings and Thin Films Technology, 23-24 December 2005, Sun Moon Lake, Nantou, Taiwan.
46. J.-H. Huang*, K.H. Chang and G.-P. Yu (2006)”Effect of Oxygen Flow Rate on the Structure and Properties of Nanocrystalline Zr(N,O) Thin Films Deposited by Ion Plating”, 33th International Conference on Metallurgical Coatings and Thin Films, 2006, Town and Country Hotel, San Diego, California, USA.
47. S.-H Chiu, J.-H. Huang, and G.-P. Yu (2006)”Synthesis and Characterization of Nanocrytalline TiNxOy Thin Films by Unbalanced Magnetron Sputtering”, 33th International Conference on Metallurgical Coatings and Thin Films, 2006, Town and Country Hotel, San Diego, California, USA.
48. K.-C Lan, J.-H. Huang, and G.-P. Yu (2006)”Analysis of the Structure and Properties of Zr(N,O) Thin Films on Si(100) Deposited by HCD-IP Method”, 33th International Conference on Metallurgical Coatings and Thin Films, 2006, Town and Country Hotel, San Diego, California, USA.
49. S. Chiu, J.-H. Huang, and G.-P. Yu (2006)”Oxygen Doping on the Structure and Properties of Nanocrystalline TiNxOy Thin Films”, 33th International Conference on Metallurgical Coatings and Thin Films, 2006, Town and Country Hotel, San Diego, California, USA.
50. J.-H. Huang*, Z.-E. Tsai and G.-P. Yu (2007)”Synthesis and Characterization of Nanocrystalline Zr(N,O) Thin Films on AISI 304 Stainless Steel by Ion Plating”, 34th International Conference on Metallurgical Coatings and Thin Films, 2007, Town and Country Hotel, San Diego, California, USA.(NSC 96-2221-E-007-094)
51. H.-M. Tung, J.-H. Huang, and G.-P. Yu (2007)”Hardness and Residual Stress in Nanocrystalline ZrN Films: Effect of Bias Voltage and Heat Treatment”, 34th International Conference on Metallurgical Coatings and Thin Films, 2007, Town and Country Hotel, San Diego, California, USA.
52. Y.-W. Lin, J.-H. Huang, and G.-P. Yu (2007)”Effect of Ion Enhance on Ti1-xAlxN Thin Films Deposited by Rf-Reactive Sputtering”, 34th International Conference on Metallurgical Coatings and Thin Films, 2007, Town and Country Hotel, San Diego, California, USA.
53. J.-H. Huang*, T.H. Wu and G.-P. Yu (2008)”Heat Treatment Induced Phase Separation and Phase Transformation of ZrNxOy Thin Films Deposited by Ion Plating”, 35th International Conference on Metallurgical Coatings and Thin Films, 2008, Town and Country Hotel, San Diego, California, USA.
54. S. J. Wang, J.-H. Huang, and G.-P. Yu (2008)”Development of Zirconium Oxynitride Thin Films on Si(100) by HCD-IP System and Heat Treatment”, 35th International Conference on Metallurgical Coatings and Thin Films, 2008, Town and Country Hotel, San Diego, California, USA.
55. C.C. Tsai, P.K Liaw, J.-H. Huang, and G.-P. Yu (2008)”Characterization of Amorphous and Crystalline Metallic Glass Thin Films Deposited by Unbalanced Magnetron Sputtering System”, 35th International Conference on Metallurgical Coatings and Thin Films, 2008, Town and Country Hotel, San Diego, California, USA.
56. Jeh-Yin Chang, J.-H. Huang, and G.-P. Yu (2008)”Determination of Young’s Modulus and Poisson’s Ratio of Thin Films by Combining sin2y X-ray Diffraction and Laser Curvature Methods”, 35th International Conference on Metallurgical Coatings and Thin Films, 2008, Town and Country Hotel, San Diego, California, USA.
57. Y.Y. Cheng, J.-H. Huang, and G.-P. Yu (2008)”Control of Preferred Orientations of TiN and ZrN Thin Films by Thin Film Templates”, 35th International Conference on Metallurgical Coatings and Thin Films, 2008, Town and Country Hotel, San Diego, California, USA.
58. C.P. Chuang, P.K. Liaw, R.C. Kuo, J.H. Huang, G.P. Yu, W. Dmowski, R. Li, T. Zhang, and R. Yang (2008)“The effect of hydrogen charging on Ln-based amorphous materials”, 2008, TMS Annual Meeting & Exhibition, New Orleans, LA, USA.(Oral by C. P. Chuang)
59. J.-H. Huang, T.C. Lin and G.-P. Yu (2009)”Phase Transition and Mechanical Properties of Zr(N,O) Thin Films on AISI 304 Stainless Steel”, 36th International Conference on Metallurgical Coatings and Thin Films, 2009, Town and Country Hotel, San Diego, California, USA.(Oral)
60. S.-J. Chiu, J.-H. Huang, G.-P. Yu and H.-Y. Lee (2009)”Preparation of Artificial BiFeO3/SrTiO3 Superlattices by rf Sputtering”, 36th International Conference on Metallurgical Coatings and Thin Films, 2009, Town and Country Hotel, San Diego, California, USA.(Oral)
61. J.-H. Huang, J.L. Lin and G.-P. Yu (2009)”TiN/Ti Thin Film on Flexible PET Substrate Deposited by rf Magnetron Sputtering”, 36th International Conference on Metallurgical Coatings and Thin Films, 2009, Town and Country Hotel, San Diego, California, USA.(Poster)
62. Y.W. Lin, J.-H. Huang and G.-P. Yu (2009)”The Structure and Properties of Nano-Crystalline ZrTiN Thin Films: Effect of Ratio of Ti/Zr”, 36th International Conference on Metallurgical Coatings and Thin Films, 2009, Town and Country Hotel, San Diego, California, USA.(Poster)
63. H.M. Chu, J.-H. Huang and G.-P. Yu (2009)”Analysis of ZrN/Zr Thin Film on Flexible Polyethylene Terephthalate (PET) Substrate Deposited by Unbalanced Magnetron Sputtering”, 36th International Conference on Metallurgical Coatings and Thin Films, 2009, Town and Country Hotel, San Diego, California, USA.(Poster)
64. Yu-Wei Lin, Jia-Hong Huang, Ge-Ping Yu (2009)” Effect of nitrogen flow rate on properties of nanostructured TiZrN thin films produced by radio frequency magnetron sputtering”, TACT2009 International Confernce, 2009, Taipei, Taiwan. (Oral)
65. C.P. Chuang, W. Dmowski, P.K. Liaw, J.H. Huang, and G.P. Yu (2009)“Structural Characterization of a Bulk Metallic Glass under a Tensile Stress via In-Situ High Energy X-Ray Diffraction”, 2009, TMS Annual Meeting & Exhibition, San Francisco, CA, USA.(Oral by C.P. Chuang)
66. Jia-Hong Huang, “Measurement of Residual Stress and Elastic Constants for Transition Metal Nitride Thin Films”, 37th International Conference on Metallurgical Coatings and Thin Films, 2010, Town and Country Hotel, San Diego, California, USA.(Invited talk)
67. S.J. Chiu, H.-Y. Lee, G.-P. Yu and J.-H. Huang (2010), “Enhancement of Bottom Electrode on Ferroelectric Properties and Fatigue Properties of BFO/STO Symmetrical Structure”, 37th International Conference on Metallurgical Coatings and Thin Films, 2010, Town and Country Hotel, San Diego, California, USA. (Oral)
68. K.-C. Lan, J.-H. Huang and G.-P. Yu (2010), “Structure and Property of Nanocrystalline ZrNxOy Thin Film: Effect of Oxygen Content and Film Thickness”, 37th International Conference on Metallurgical Coatings and Thin Films, 2010, Town and Country Hotel, San Diego, California, USA. (Oral)
69. Y.-W. Lin, J.-H. Huang and G.-P. Yu (2010), “Effect of (Ti,Zr) Interlayer on the Structure and Properties of (Ti,Zr)N Thin Films”, 37th International Conference on Metallurgical Coatings and Thin Films, 2010, Town and Country Hotel, San Diego, California, USA. (Poster)
70. P.-N. Chen, J.-H. Huang and G.-P. Yu (2010), “Characterization of Amorphous and Crystalline Zr-Cu-Ag-Al Metallic Thin Films with Different Thickness by Unbalanced Magnetron Sputtering”, 37th International Conference on Metallurgical Coatings and Thin Films, 2010, Town and Country Hotel, San Diego, California, USA. (Poster)
71. C.H. Lee, J.-H. Huang and G.-P. Yu (2010), “Resistive Switching Effect in Zirconium Oxynitride Thin Film Deposited by Unbalanced Magnetron Sputtering”, 37th International Conference on Metallurgical Coatings and Thin Films, 2010, Town and Country Hotel, San Diego, California, USA. (Poster)
72. C.-Y. Su, J.-H. Huang, G.-P. Yu and J.-Y. Wu (2010), “Structure and Properties of Nanocrystalline TiN Thin Film Produced by High Power Impulse Magnetron Sputtering: Effect of Ionization Rate”, 37th International Conference on Metallurgical Coatings and Thin Films, 2010, Town and Country Hotel, San Diego, California, USA. (Poster)
73. Yu-Ying Hu, Ge-Ping Yu, and Jia-Hong Huang(2010), “Phase Transition and Related Properties of Nanocrystalline Zr(N,O) Thin Films by Unbalanced Magnetron Sputtering”, ThinFilms2010 International Conference, 2010, Harbin, China.(Poster)
74. W.-R. Chen, G.-P. Yu and J.-H. Huang(2011), “The Mechanical Properties of Ti-Si-N Nanocomposite Films Deposited by Magnetron Sputtering”, 38th International Conference on Metallurgical Coatings and Thin Films, 2011, Town and Country Hotel, San Diego, California, USA. (Oral)
75. A.-N. Wang, G.-P. Yu and J.-H. Huang (2011),”Measurement of Fracture Toughness on TiN Thin Films”, 38th International Conference on Metallurgical Coatings and Thin Films, 2011, Town and Country Hotel, San Diego, California, USA. (Poster)
76. Y.-W. Lin, J.-H. Huang and G.-P. Yu (2011), “ The Effect of Bias on the Structure and Property of (Ti,Zr)N Thin Film Deposited by Radio Frequency Magnetron Sputtering”, 38th International Conference on Metallurgical Coatings and Thin Films, 2011, Town and Country Hotel, San Diego, California, USA. (Poster)
77. Q.-Y. Chen, J.-H. Huang and G.-P. Yu (2011), “Heat Treatment of Nanocrystalline TiZrN Film Deposited by Unbalanced Magnetron Sputtering”, 38th International Conference on Metallurgical Coatings and Thin Films, 2011, Town and Country Hotel, San Diego, California, USA. (Poster)
78. J.-H. Huang, P.-H. Huang, and G.-P. Yu (2011), “The Phase Transition and Corrosion Resistance of ZrO2(N) Thin Films on AISI 304 Stainless Steel Deposited by Ion Plating”,2011, TACT2011 International Thin Films Conference, Kent Ting, Taiwan. (Invited talk)
79. C.P. Chuang, W. Dmowski, P.K. Liaw, Y. Liu, T.J. Udovic, G.P. Yu, J.H. Huang, L. Huang, and T. Zhang (2012) Study the hydrogen induced volume expansion and the embrittlement of Zr-based bulk metallic glasses”, 2012, TMS Annual Meeting & Exhibition, Orlando, FL, USA.(Oral by C.P. Chuang)
80. J.-H. Huang, P.-H. Huang, and G.-P. Yu (2012), “The Phase Transition and Corrosion Resistance of ZrO2(N) Thin Films on AISI 304 Stainless Steel Deposited by Ion Plating,”, 39th International Conference on Metallurgical Coatings and Thin Films, 2012, Town and Country Hotel, San Diego, California, USA. (Oral)
81. A.N. Wang, G.P. Yu, and J.H. Huang (2012), “Measurement of Fracture Toughness on TiN thin film”, 39th International Conference on Metallurgical Coatings and Thin Films, 2012, Town and Country Hotel, San Diego, California, USA. (Oral by A.N. Wang)
82. Y.K. Cheng, G.P. Yu, and J.H. Huang (2012), “Influence of thickness on mechanical and corrosion properties of Ti-Si-N coatings on D2 steel by unbalanced magnetron sputtering.”, 39th International Conference on Metallurgical Coatings and Thin Films, 2012, Town and Country Hotel, San Diego, California, USA. (Poster)
83. C.W. Lu, G.P. Yu, and J.H. Huang (2012), “Effect of Nitrogen Flow Rate on The Structure And Mechanical Properties of TiZrN Thin Films by Unbalanced Magnetron Sputtering,”, 39th International Conference on Metallurgical Coatings and Thin Films, 2012, Town and Country Hotel, San Diego, California, USA. (Poster)
84. J.W. Hsieh, G.P. Yu, and J.H. Huang (2012), “Growth of Zirconium Oxide by Heat Treatment of Zirconium Nitride Film under Controlled Atmosphere and Vacuum”, 39th International Conference on Metallurgical Coatings and Thin Films, 2012, Town and Country Hotel, San Diego, California, USA. (Poster)
85. C.Y. Chen, G.P. Yu, J.Y. Wu, and J.H. Huang (2012), “Effect of degree of ionization on preferred orientation and properties of TiN thin films deposited by high power impulse magnetron sputtering,”, 39th International Conference on Metallurgical Coatings and Thin Films, 2012, Town and Country Hotel, San Diego, California, USA. (Poster)
86. Jia-Hong Huang (2012)“Corrosion Protective Coatings using Transition Metal Nitrides and Oxynitrides”, 16th Asian Pacific Corrosion Control Conference, 2012, Kaohsiung, Taiwan. (Invited talk)
87. Jia-Hong Huang (2012)“Corrosion Protective Coatings using Transition Metal Nitrides and Oxynitrides”, The 8th Cross-strait Seminar on Thin-Film Science and Technology, 2012, Ningbo, China. (Invited talk)
88. J.-H. Huang, J.-W, Hsieh, and G.-P. Yu (2013), “Growth of ZrO2 by Heat Treating ZrN Thin Film in Vacuum”, 40th International Conference on Metallurgical Coatings and Thin Films, 2013, Town and Country Hotel, San Diego, California, USA. (Oral)
89.A.N. Wang, G.P. Yu, and J.H. Huang (2013), “Determining Average Effective X-ray Elastic Constant (AEXEC) of Hard Coatings by Combining cos2αsin2ψ X-ray Diffraction and Laser Curvature Methods”, 40th International Conference on Metallurgical Coatings and Thin Films, 2013, Town and Country Hotel, San Diego, California, USA. (Oral by A.N. Wang)
90.Y.-H. Chen, G.P. Yu, and J.H. Huang (2013), “Fracture Toughness Measurement of ZrN Hard Coatings”, 40th International Conference on Metallurgical Coatings and Thin Films, 2013, Town and Country Hotel, San Diego, California, USA. (Poster)
91. P.H. Wu, J.H. Huang and G.P. Yu (2013), “Controlled Vacuum Annealing of TiZrN Thin Film on Si (001) and AISI 304 Stainless Steel Deposited by Unbalanced Magnetron Sputtering”, 40th International Conference on Metallurgical Coatings and Thin Films, 2013, Town and Country Hotel, San Diego, California, USA. (Poster)
92. Y.-W. Lin, J.H. Huang and G.P. Yu (2013), “The Development and Application on the Process Technique of (ZrxHf1-x)N Thin Film,”, 40th International Conference on Metallurgical Coatings and Thin Films, 2013, Town and Country Hotel, San Diego, California, USA. (Poster)
93. M.-L. Cai, G.P. Yu, and J.H. Huang (2013), “Producing Thick TiN Films by Controlling Deposition Parameters in Magnetron Sputtering”, 40th International Conference on Metallurgical Coatings and Thin Films, 2013, Town and Country Hotel, San Diego, California, USA. (Poster)
94. Jia-Hong Huang, A.N. Wang and G.P. Yu (2013)“Fracture Toughness Measurement on TiN Hard Coatings using Internal Energy Induced Cracking”, The 9th Cross-strait Seminar on Thin-Film Science and Technology, 2013, Taipei, Taiwan. (Invited talk)
95. J.-W, Hsieh, S.-A. Chou, G.-P. Yu and J.-H. Huang (2013), “Growth of ZrO2 by Heat Treating ZrN Thin Film under Controlled Atmosphere”, TACT2013 International Thin Films Conference, 2013, Taipei, Taiwan. (Poster Award)
96. Y.-H. Chen, Y-F. Chen, G.P. Yu, and J.H. Huang (2013), “Fracture Toughness Measurement of ZrN Hard Coatings”, TACT2013 International Thin Films Conference, 2013, Taipei, Taiwan. (Poster Award)
97. Jia-Hong Huang, Y.H. Chen and G.P. Yu (2013) “Evaluation of Fracture Toughness of ZrN Hard Coatings by Internal Energy Induced Cracking Method” Workshop on Functional Ceramics 11/8/2013, University of Macau, Macau, China. (Invited talk)
C. Other Publication
Coauthor Book:
1.C.-H. Ma, J.-H. Huang, Haydn Chen (2005), “Ion Beam Assisted Deposition of Transition-Metal Nitrides”, in Handbook on Residual Stress, 2nd edition, Volume 1, Residual Stress: Manufacturing and Materials Processing, edited by Jian Lu, Published by the Society for Experimental Mechanics, Inc. through the American Institute of Physics, USA, pp. 190-215. (ISBN9780912053936)
2. Yung-Hsien Wu, Jia-Hong Huang* (2013), “Application of Oxynitrides for Microelectronic Devices and Gas Barriers”, in Metallic Oxynitride Thin Films by Reactive Sputtering and Related Deposition Methods, edited by Flipe Vaz, Nicolas Martin and Martin Fenker, Published by Bentham Science Publishers, UAE, pp. 285-339. (ISBN9781608051571)
Research Report:
1. T.H. Tsai, J.H. Huang, W.F. Hsieh and S.P. Huang (1990) "Study on Hydriding and Irradiated Behavior of Zr-2 and Zr-4", THNE-90-M03, Internal Report.(in Chinese)
2. J.-H. Huang, T.H. Tsai, J.J. Kai, and S.-P. Huang (1991) "A Study of Hydrogen Embrittlement on Zirconium Alloys", Final report to the National Science Council ROC on contract NSC79-0413-E007-18.(in Chinese)
3. J.J. Kai, T.H. Tsai, J.H. Huang, J.S. Duh, S.P. Huang and W.F. Hsieh (1991) "Study of Radiation Damage and Hydrogen Embrittlement Mechanism of Zircaloy Cladding", THNE-91-M02, Internal Report.(in Chinese)
4. J.-H. Huang, T.H. Tsai, J.J. Kai, S.-P. Huang and C.-S. Ho (1992) "A Study of Delayed Hydride Cracking in Zirconium Alloys", Final report to the National Science Council ROC on contract NSC 80-0413-E-007-24.(in Chinese)
5. J.J. Kai, T.H. Tsai, J.H. Huang and G.P. Yu (1992) "Study of Spent Fuel Materials Performance in Dry Interim Storage-Phase I", Final report to Atomic Energy Council ROC.(in Chinese)
6. J.-H. Huang, T.H. Tsai, C.-S. Ho, M.-S. Yeh and F.-I. Jiang (1993) "Study on Mechanical Properties of Zirconium Alloy in Hydrogen Gas", Final report to the National Science Council ROC on contract NSC 81-0413-E-007-577.(in Chinese)
7. J.J. Kai, T.H. Tsai and J.H. Huang(1993) "Study of Uniform Corrosion and Behavior of Hydrogen Embrittlement on Zircaloy ", Final report to Atomic Energy Council ROC.(in Chinese)
8. J.-H. Huang, J.J. Kai, J.J. Shiao (1993) "Study of Thermal Aging Embrittlement and Lifetime Assessment on Recirculation Elements in Nuclear Power Plant-Phase I", Final report to the National Science Council ROC on contract NSC 82-0413-E-007-088.(in Chinese)
9. J.J. Kai, T.H. Tsai, J.H. Huang and G.P. Yu (1993) "Study of Spent Fuel Materials Performance in Dry Interim Storage-Phase II", Final report to Atomic Energy Council ROC.(in Chinese)
10. J.-H. Huang, M.-S. Yeh and F.-I. Jiang (1994) "Study on Cracking of Hydrided Zirconium Alloy in Hydrogen Gas", Final report to the National Science Council ROC on contract NSC 82-0413-E-007-276.(in Chinese)
11. J.-H. Huang, J.J. Kai, J.J. Shiao (1994) "Study of Thermal Aging Embrittlement and Lifetime Assessment on Recirculation Elements in Nuclear Power Plant-Phase II", Final report to the National Science Council ROC on contract NSC 83-0413-E-007-071.(in Chinese)
12. J.J. Kai, T.H. Tsai, J.H. Huang and G.P. Yu (1994) "Study of Spent Fuel Materials Performance in Dry Interim Storage-Phase III", Final report to Atomic Energy Council ROC.(in Chinese)
13. J.-H. Huang, M.-S. Yeh and C.-S. Mar (1995) "A Study of Hydrogen Embrittlement on Titanium Alloys", Final report to the National Science Council ROC on contract NSC 83-0413-E-007-011 and NSC 84-2212-E-007-068.(in Chinese)
14. J.-H. Huang and M.-S. Yeh (1996) "Effects of Hydrogen Gas on the Mechanical Properties of Titanium Alloys", Final report to the National Science Council ROC on contract NSC 85-2212-E-007-007.(in Chinese)
15. G.P. Yu, J.-H. Huang and Y.C. Sung (1996) "A Study of Applying Ceramic Film to Improve Surface Properties of the Piping Steels in Nuclear Power Plant", Final report to the National Science Council ROC on contract NSC 85-2216-E-007-034.(in Chinese)
16. J.-H. Huang and M.-S. Yeh (1997) "A Study of Hydrogen-Induced Subcritical Crack Growth in Ti-6Al-4V Alloy", Final report to the National Science Council ROC on contract NSC 86-2212-E-007-053. (in Chinese)
17. J.-H. Huang (1998) "The Application of X-Ray Diffraction on the Analysis of Ceramic Thin Films" , Final report to the National Science Council ROC on contract NSC 35169F.
18. J.-H. Huang (1999) " Effect of Processing Parameters on the Microstructure and Mechanical Properties of TiN Film on Stainless Steel by HCD Ion Plating" , Final report to the National Science Council ROC on contract NSC 88-2212-E-007-042.
19. J.-H. Huang (2000) " The Effect of Controlling Film Thickness and Incident Ion Direction on the Structure and Properties of TiN Thin Film Grown by Ion Plating" , Final report to the National Science Council ROC on contract NSC 89-2216-E-007-036.
20. J.-H. Huang and G.-P. Yu (2000) " Study of Stress Corrosion Cracking Behavior on the Shaft Steel of Reactor Cooling Pump" , Final report to the National Science Council ROC on contract NSC 89-TPC-7-007-005.(in Chinese)
21. J.-H. Huang (2001) " Using Experimental Design Method to Study the Effect of Processing Parameters on the Properties of ZrN Thin Film", Final report to the National Science Council ROC on contract NSC 89-2216-E-007-071.
22. J.-H. Huang (2001) " Effect of Processing Parameters on the Corrosion Properties of ZrN-Coated Stainless Steel" , Final report to the National Science Council ROC on contract NSC 89-2216-E-007-070.
23. J.-H. Huang (2002) " Effect of Bias on the Mechanical Properties and Microstructure of ZrN Thin Film" , Final report to the National Science Council ROC on contract NSC 90-2216-E-007-076.
24. J.-H. Huang (2002) " Optimization of the Deposition Process of TiN Thin Films Using Design of Experiment Method" , Final report to the National Science Council ROC on contract NSC 90-2216-E-007-077.
25. J.-H. Huang and Kiang-Wee Lau (2003) ” Effect of Nitrogen Flow Rate on Structure and Properties of Nanocrystalline TiN Thin Film by Unbalanced Magnetron Sputtering”, Final report to the National Science Council ROC on contract NSC 91-2216-E-007-039.
26. J.-H. Huang and Chih-Hsin Ho (2003) ” Effect of Nitrogen Flow Rate on the Structure and Mechanical Properties of ZrN Thin Film on Si(100) and Stainless Steel Substrates”, Final report to the National Science Council ROC on contract NSC 91-2216-E-007-040.
27. J.-H. Huang and Fan-Yi Ouyang(2004) ”Study of processing and properties of nanocrystalline TiN thin film produced by unbalanced magnetron sputtering”, Final report to the National Science Council ROC on contract NSC 92-2216-E-007-016.
28. J.-H. Huang and Fan-Yi Ouyang (2005) “Effect of film thickness and Ti interlayer thickness on the mechanical and corrosion resistant properties of nanocrystalline TiN thin film by unbalanced magnetron sputtering”, Final report to the National Science Council ROC on contract NSC 93-2216-E-007-028.
29. J.-H. Huang and Tsan-Huang Wu (2006) “Effect of Ti interlayer on residual stress and texture development of TiN thin films deposited by unbalanced magnetron sputtering”, Final report to the National Science Council ROC on contract NSC 94-2216-E-007-010.
30. J.-H. Huang and Yu-Chen Li(2007) “Deposition Process and Properties for ZrN on Si(100) Substrate with Pre-existed Zr Interlayer”,Final report to the National Science Council ROC on contract NSC 95-2221-E-007-059.
31. J.-H. Huang and Zhang-En Tsai (2008) “Mechanical Properties and Corrosion Resistance of Nanocrystalline ZrNxOy Coatings on AISI 304 Stainless Steel by Ion Plating”,Final report to the National Science Council ROC on contract NSC 96-2221-E-007-094.
32. J.-H. Huang and Jeh-Yin Chang (2009) “Determination of Young’s Modulus and Poisson’s Ratio of Thin Films by Combining sin2 X-ray Diffraction and Laser Curvature Methods”, Final report to the National Science Council ROC on contract NSC 97-2221-E-007-017.
33. J.-H. Huang, Yu-Ying Hu and Tzu-Chun Lin (2010) “Processing and Characterization of Zr2ON2 and N-doped ZrO2 Nanocrystalline Thin Films” Final report to the National Science Council ROC on contract NSC 97-2221-E-007-016-MY2.
34. J.-H. Huang, Po-Hua Huang and A.N. Wang (2011)” The Phase Transition and Corrosion Resistance of ZrO2(N) Thin Films on AISI 304 Stainless Steel Deposited by Ion Plating” Final report to the National Science Council ROC on contract NSC 99-2221-E-007-021.
35. J.-H. Huang, Wei-Rong Chen and Yun-Kai Cheng (2012) ”The Mechanical Properties of Ti-Si-N Nanocomposite Films Deposited by Magnetron Sputtering” Final report to the National Science Council ROC on contract NSC 99-2221-E-007-020-MY2.
Lecture Notes:
1. Jia-Hong Huang (2001) "Lecture-notes of Thermodynamics of Materials."
2. Jia-Hong Huang (2002) "Lecture-notes of Physical Metallurgy(I)."
3. Jia-Hong Huang (2002) "Lecture-notes of Physical Metallurgy(II)."
4. Jia-Hong Huang (2002) "Lecture-notes of Advanced Physical Metallurgy."
5. Jia-Hong Huang (2003) ”Lecture-notes of Introduction of Thin Film Engineering.”
6. Jia-Hong Huang (2006) ”Lecture-notes of Mechanical Behavior of Materials.”
7. Jia-Hong Huang (2007) ”Lecture-notes of Thermodynamics of Materials.”1st revised edition.
8. Jia-Hong Huang (2008) ”Lecture-notes of Defects in Crystals.”
回到頂端