GE-PING Yu(喻冀平), PH.D.
.jpg)
OFFICE ADDRESS
Department of Engineering and System Science,
National Tsing Hua University,
101, Section 2, Kuang Fu Road Hsinchu,
Taiwan 300 Republic of China
Phone: (886)35715131 ext. 4322
FAX: (886)35720724
E-mail: gpyu@ess.nthu.edu.tw
Date and Place of Birth: Feb 13, 1952, Taipei, Taiwan, ROC.
EXPERIENCE :
September 1981 - July 1987
Associate Professor,
Department of Nuclear Engineering,
National Tsing Hua University, Hsinchu, Taiwan, ROC.
August 1987 - March 1997
Professor,
Department of Nuclear Engineering,
National Tsing Hua University, Hsinchu, Taiwan, ROC.
March 1997 -
Professor,
Department of Engineering and System Science,
National Tsing Hua University, Hsinchu, Taiwan, ROC.
EDUCATION:
Aug.1978 - Jun. 1981
Massachusetts Institute of Technology, U.S.A.
Sc.D. in Nuclear Engineering.
Thesis: Relationship of Material Property to the Design of a Fusion Reactor First Wall.
Sept.1976 - June 1978
National Tsing Hua University, Taiwan, R.O.C.
M.S. in Nuclear Engineering.
1970- June 1974
National Tsing Hua University, Taiwan, R.O.C.
B.S. in Nuclear Engineering.
Courses Taught:
Undergraduate:
Engineering Mechanics
Introduction to Materials Science
Engineering Thermodynamics
Physical Metallurgy
Mechanical Behavior of Materials
Introduction to Nuclear Engineering
Corrosion
Mechanical Metallurgy
Graduate:
Reactor Safety
Nuclear Fuel
Nuclear Structural Material
Radiation Damage
Papers:
A: Referred Papers
1.Michiko Hamasaki, Shi-Chien Lin, G.P.Yu, and Yii-Der Chuang Sept. (1979) “The Effect of Zirconium-Hydride Dispersion and Spheriodization Treatment on the High Temperature Mechanical Properties of Zircaloy-2,“ Nucl. Sci. J., Vol.16, pp.129-143.
2.Otto Harling, G.P.Yu, N. Grant and J.E. Meyer, (1981)“Application of the High Strength Copper Alloy in a Fusion Reactor First Wall,“ J. Nucl. Mat., Vol.103 & 104, pp.127-132.
3.G.P.Yu, and J.E. Meyer, Dec (1982) “Relationship of Material Properties to the Design of a Fusion Reactor First Wall,“ ANS Trans.,Vol.39, pp.259-260.
4.W.E.Wang, M.C.Her, and G.P.Yu, (1983) “Investigation of Irradiated TRR Fuel Rod, “ Nucl. Sci. J., Vol.20, No.1, pp.1-7.
5.C.H.Tsai, G.P.Yu and C.C.Tseng, (1984) “On the Simplification of a Complicated Power History for Fuel Performance Evaluation,“ ANS Trans., Vol.46, pp.347-348.
6.G.P.Yu, and J.S.Chen, (1984) “Comparison of the Inelastic Response of Type 316 Stainless Steel and HT-9 Materials on the Fusion Reactor First Wall,“ ANS Trans., Vol.47, pp.142-143.
7.G.P.Yu, C.H.Tsai and C.Ko, (1985) “The Study of Improved Fuel Design Concept for Taiwan Research Reactor,“ Nucl. Sci. J.,Vol.22, No.1, pp.42-50.
8.T.N.Yang, G.P.Yu, and L.J.Chen, (1985) “The Characterization of Nitrogen-Ion-Irradiation Induced Dislocation Loops in Zirconium,“ Phys.State. Sol., (a)92, p399.
9.T.N.Yang, G.P.Yu, and L.J.Chen, (1985) “Nitrogen Ion Irradiation Induced Microstructural Defects in Zirconium,“ Chinese J.of Material Science, 17A, No.2, pp.8-15.
10. B.S.Pei, G.P.Yu, C.C.Chieng, H.P.Chou, J.K.Hsieh, and R.Y.Yuann, Feb. (1986) “RETRAN-02 Small Break LOCA Analysis on Chinshan Unit 1‘s HDCI Steam Supply Line 0.1ft2 Break,“ Nucl. Sci. J.,Vol.23, No.1, pp.21-29.
11. G.P.Yu, H.P.Chou, C.C.Chieng, B.S.Pei, J.K.Hsiue, and R.Y.Yuann, April (1986) “RETRAN-02 Small Break LOCA Analysis of Chinshan Nuclear Power Plant-On Turbine Trip Without Bypass Causing Stuck Open Relief Valve,“ Nucl. Sci. J., Vol.23, No.2, pp.91-95.
12. G.P.Yu, (1986) “Study of Damaged Microstructure of N+ Irradiated Zirconium and Zircaloy by TEM,“ Nucl. Sci. J.,Vol.23(1), pp.60-72.
13. G.P.Yu, July (1987) “Comparison of the Inelastic Response of SS316 and HT-9 Materials on the Fusion Reactor First Wall,“ Fusion Tech., Vol.12, pp.137-144.
14. T.N.Yang, G.P.Yu and L.J.Chen, July (1987) “Precipitate Stability in β-Quenched Zircaloy-4 Irradiated by Nitrogen-Ions at 470C,“ J. Nucl. Mat., Vol.150, pp.67-77.
15. J.C.Kang, B.S.Pei, G.P.Yu and R.Y.Yuann, Dec (1987)“Analysis of Maanshan Unit 2 Full Rod Rejection Transient,” ANS Trans., Vol.55, pp.468-470.
16. G.P.Yu, B.S.Pei and Y.P.Ma, May (1989) “Reducing Scram Frequency by Relaxing Reactor Trip Setpoints at Maanshan Nuclear Power Station,“ Nucl. Tech., Vol.85, No.2, pp.147-159.
17. G.P.Yu, C.H.Tsai, May (1989) “The Electrochemical Behavior and Stress Corrosion Cracking susceptibility of Inconel 600 in Thiosulfate and Tetrathionate Solutions,“ Proc. Nat. Sci. Counc.,Vol.13, No.3, pp.162-169.
18. J.J.Kai, G.P.Yu, C.H.Tsai, M.N.Lia, and S.C.Yao, (1989)“The Effects of Heat Treatment on the Chromium Depletion, PrecipitateEvolution, and Corrosion Resistance of Inconel Alloy 690,“ Metallurgical Transactions A., Vol.20A, pp.2057-2067.
19. G.P.Yu and Hsun-Chung Yao, May (1990) “The Relation Between the Resistance of IGA and IGSCC and Chromium Depletion of Inconel 690,“ Corrosion, Vol.46, No.5, pp.391-401.
20. B.S.Pei, G.P.Yu, G.C.Lin, and Y.P.Ma, April (1990)“Assessment of the Safety Function for the Anticipated Transient without Trip Mitigation System Actuation Circuitry at Maanshan Nuclear Power Station,“ Nuclear Technology, Vol.90, No.1, pp.49-62.
21. G.P.Yu and J.T.Ho, Jane (1990) “Pitting Corrosion of Inconel 600 in Chloride and Thiosulfate Solution,“ ANS Trans., Vol.61,pp.143-145.
22. G.P.Yu, B.S.Pei and M.Y.Lin, June (1990) “Analysis of Important Design Features of an Evolutionary Advanced Light Water Reactor,“ ANS Trans., Vol.61, pp.269-270.
23. B.S.Pei, G.P.Yu, G.C.Lin, and Y.P.Ma, June (1990)“Assessment of the Safety Function for the Anticipated Transient without Trip Mitigation System Actuation Circuitry and Maanshan Nuclear Power Station,“ ANS Trans., Vol.61, pp.242-243.
24.G.P.Yu, B.S,Pei, K.W.Chou, and S.S.Chiou, Feb (1991) “The Analysis of Corrosion-Erosion in the Steam Extraction Lines of Nuclear Power Plants,“ Nucl. Sci. J., Vol.28(1), pp.23-36.
25. G.P.Yu, B.S.Pei, M.Y.Lin, C.Pan, S.H.Li, and L.Kao,April (1991) “Analysis of the Important Design Features of An Evolutionary Advanced Pressurized Water Reactor,“ Nucl. Sci. J.,Vol.28(2), pp.117-132.
26. S.H.Li, F.L.Chen, and G.P.Yu, July (1991) “Preliminary Assessments for Disposal of High Level Waste Within the islet Formations,“ Nuclear Technology, Vol.95, No.1, pp.54-63.
27. G.P.Yu, B.S.Pei, and C.Pan, June (1991) “Analysis of Power Test Data of Chinshan-1 Nuclear Power Plant with the BNL Plant Analyzer,“ ANS Trans., Vol.63, pp.462-463.
28. G.P.Yu, P.S.Lee, June (1991) “Two Dimentional Fatigue Crack Analysis of Fusion Reactor HT-9 First Wall,“ ANS Trans., Vol.63,pp.178-179.
29. L.Kao, Y.Fan, B.S.Pei, and G.P.Yu, June (1991) “Safety Analysis of Bleed-and Feed Operations for Maanshan Power Plant,“ ANS Trans., Vol.63, pp.249-250.
30. J.T.Ho, and G.P.Yu, (1992) “Pitting Corrosion of Inconel 600 in Chloride and Thiosulfate Anion Solutions at Low Temperature,“Corrosion, Vol.148, No.2, pp.147-158.
31. M.Y.Chang, and G.P.Yu, June (1993) “Pitting Corrosion of Inconel 600 in Chloride and Sulfate Solutions at Low Temperature,“ J.Nucl. Mat., Vol.202, pp.145-153.
32. J.J.Kai, C.H.Tsai, G.P.Yu, July (1993) “The IGSCC,sensitization, and microstructure study of Alloy 600 and 690,“Nuclear Engineering and Design, Vol.144, pp.449-457.
33. J.T.Ho and G.P.Yu, Sept (1994) “Fatigue Crack Growth Behavior of Alloy 600 in NaCl Solution at Cathodic Potential,“ Journal of Chinese Corrosion Engineering, Vol. 8, No. 3, p130-139.
34. J.T.Ho and G.P.Yu, (1995) “Effect of Hydrogen on the Fatigue Behavior of Alloy 600 at Cathodic Potential,“ Scripta Metallurgica et Materialia Vol.32, No.11, pp.1845-1849.
35. J.T.Ho and G.P.Yu, May (1995) “Fatigue Behavior of Alloy 600 in NaCl Solution at Room Temperature“ J. Nucl. Mat. Vol. 226 p226-237
36. J.T.Ho and G.P.Yu, (1996) “Hydrogen-Enhanced Fatigue Crack Growth of Alloy 600,“ Material Chemistry and Physics, vol.45 p262-273.
37. F.S.Shieu, Y.C.Sung, L.H.Cheng, J.H.Huang, and G..P.Yu(1997) “Control of the corrosion resistance of Ti N- Coated AISI 304 Stainless steel”, Corrosion Science, Vol.39, P.893-899.
38. F.S.Shieu, L.H.Cheng, Y.C.Sung, J.H. Huang, and G.P. Yu (1997) “Characterization of the ion-plated Ti N on AISI 304 Stainless Steel by energy filtering TEM”J. Vac. Sci. Technol. A 15(4), pp.2318-2322.
39. C.T. Chen, Y.S.Song, G.P.Yu, and J.H.Huang, June (1998) “Microstructure and Hardness of Hollow Cathode Discharge Ion-Plated Titanium Nitride Film,”
Journal of Materials Engineering and Performance, Vol.7,No.3,pp.324-328.
40. W.L.Pan, G. P.Yu, and J.H. Huang (1998) “Mechanical Properties of Ion-Plated
TiN Film on AISI D2 steel,” Surface and Coatings Technology, Vol.110,pp.111-
119.
41. K.C.Tu, B.S.Pei, and G.P. Yu, Feb(1998) “ An Improved Theoretical Critical
Heat Flux Model of Low Pressure Mass Flux and Low Quality Conditions,”
Nuclear Science Journal, Vol. 35,No.1,pp.29-48.
42. F.S.Shieu, L.H.Cheng, Y.C. Sung, J.H.Huang, and G.P.Yu,(1998) “Microstructure
and Coating Properties of Ion-Plated TiN on type 304 stainless steel,” Thin Solid
Films,Vol.34,pp.125-132.
43. B.F. Chen, W.L.Pan, G.P.Yu, J.Hwang, and J.H. Huang (1999) “On the Corrosion
Behavior ofTiN-Coating AISI D2 Steel,” Surface and Coatings Technology,Vol
.111,pp.16-21.
44 . B.F. Chen, J.H.wang, G.P.Yu, J.H.Huang (1999) “ In Situ Observation of the
cracking behavior of TiN Coating on 304 Stainless Steel Subjected to Tensile
Strain,” Thin Solid Film Vol.352,pp.173-178.
45. J.H. Huang, Y.P.Tsai, G.P. Yu (1999)” Effect ofprocessing parameters on the
microstructure and mechanical properties ofTiN film on stainless steel by HCD
ion plating,” Thin Solid Film Vol.355-356, pp440-445.
46. J.Y. Chen, G.P.Yu, and J.H.Huang (2000) “ The Corrosion Behavior and Ad-
hesionof Ion –plated TiN Film on AISI 304 Steel,” Materials Chemistry
and Physics Vol.65,pp310-315..
47. B.F. Chen, J. Hwang, I.F. Chen, G.P. Yu, J.-H. Huang(2000) “A tensile-film-
cracking model for evaluating interfacial shear strength of elastic film on ductile
substrate,” Surface and Coatings Technology Vol.126,pp91-95.
48. Wen-Jun Chou, Ge-Ping Yu, and Jia-Hong Huang (2001)"Corrosion Behavior of
TiN- Coated 304 Stainless Steel," Corrosion Science Vol.43,pp2023-2035.(SCI,EI)
49. Wen-Jun Chou, Ge-Ping Yu, and Jia-Hong Huang (2001)"Deposition of TiN Thin
Film on Si(100) by HCD Ion Plating",Surface and Coatings Technology Vol.140,
Pp206-214.
50.Y.M.Chen,Ge-Ping Yu, and Jia-Hong Huang(2001)”Role of Process Parameters
in the Texture Evolution of TiN Films Deposited by Hollow Cathode Discharge
Ion Plating”, Surface and Coatings Technology Vol.141,pp156-163.
51. Y.M.Chen,Ge-Ping Yu, and Jia-Hong Huang(2001) “Role of process parameters
in the texture evolution of TiN films deposited by hollow cathode discharge ion
plating,” Surface and Coatings Technology vol.141,pp156-163. (SCI,EI)
52. Wen-Jun Chou, Ge-Ping Yu, and Jia-Hong Huang (2002) “Mechanical Behavior
of TiN Thin Film Coated on 304 Stainless Steel Substrate,” Surface and Coating
Technology Vol.149, pp7-13.
53. Y.M.Chen,Ge-Ping Yu, and Jia-Hong Huang(2002)”Comparison of Electro-
chemical Porosity Test Methods for TiN-Coated Stainless Steel”, Surface and
Coatings Technology Vol.150,pp309-318.
54. Y.M.Chen,Ge-Ping Yu, and Jia-Hong Huang(2002)”Characterizing the effects of
Multiprocess Parameters on the Preferred Orientation of TiN Coating Using a
Combined Index”, Vacuum, Vol.66/1,pp19-25.
55. Y.M.Chen,Ge-Ping Yu, and Jia-Hong Huang(2002)”On the Porosity of TiN Films
Deposited by HCD Ion Plating”, Surface and Coatings Technology,Vol.155/2-3,
pp239-244.
56. Y.M.Chen,Ge-Ping Yu, and Jia-Hong Huang(2002)”Pinhole Enlargement During Electrochemical Porosity Measurement”, Corrosion,Vol.58,pp846-848 (SCI,EI).
57. Y.M.Chen,Ge-Ping Yu, and Jia-Hong Huang ”Electrochemical Test for TiN –Coated Stainless Steel: Porosity and Corrosion Test” Submission.
58. Jia-Hong Huang,C.-Y.Hsu,S.-S.Chen, and Ge-Ping Yu(2002) ”Effect of Substrate
Bias on the Structure and Properties ofIon –Plated ZrN on Si and Stainless Steel
Substrates”, Materials Chemistry and Physics, Vol77,pp14-21.
59. Wen-Jun Chou, Ge-Ping Yu, and Jia-Hong Huang (2002)”Bias effect of ion-plated zirconium nitride film on Si(100)”.Thin Solid Film, Vol.45,pp162-169.(SCI,EI)
60. Wen-Jun Chou, Ge-Ping Yu, and Jia-Hong Huang (2003) “Corrosion Resistance
of ZrN Films on AISI 304 Stainless Steel Substrate”, Surface and Coating
Technology ,Vol.167 ,pp59-67 . (SCI,EI)
61. Wen-Jun Chou, Ge-Ping Yu, and Jia-Hong Huang (2003) “Effect of Heat
Treatment on the Structure and Properties of Ion –Plated TiN Films”, Surface and
Coating Technology ,Vol.168 ,pp43-50 . (SCI,EI)
62. Wen-Jun Chou, Chung-Hsing Sun,Ge-Ping Yu, and Jia-Hong Huang (2003)
“Optimization of the deposition process of ZrN and TiN thin films on Si(100)
using design of experiment method”, Materials Chemistry and Physics,Vol.82
,pp228-236. (SCI,EI)
63. Jia-Hong Huang, Kiang-Wee Lau, and Ge-Ping Yu (2005) “Effect of nitrogen flow rate on structure and properties of nanocrystalline TiN thin films produced by unbalanced magnetron sputtering",Surface & Coating Technology Vol.191
pp17-24. (SCI,EI)
64. Jia-Hong Huang, Hao-Chung Yang, Xing-Jian Guo,Ge-Ping Yu (2005)”Effect of film thickness on the structure and properties of nanocrystalline ZrN thin films
produced by ion plating”, Surface & Coating Technology Vol.195
pp204-213. (SCI,EI)
65. Jia-Hong Huang, Kae-Jy Yu, and Ge-Ping Yu (2006)”Heat treatment of nanocrystalline TiN films deposited by unbalanced magnetron sputtering”, Surface & Coating Technology Vol.200, pp204-213. (SCI,EI)
B: Conference Papers
1.Wei-E Wang, Mon-Chia Her, and G.P.Yu, Sept.(1982)“Preliminary Examination of Irradiated TRR Fuel Rod,” presented at the Symposium on the Topics of Nuclear Fuel Technology at Taipei, ROC.pp.175-187.
2.G.P.Yu, and J.E.Meyer, Dec. (1982) “Relationship of Material Properties to the Design of a Fusion Reactor First Wall,“ ANS Trans.,Vol.39, pp.259-260.
3.G.P.Yu, C.H.Tsai, C.Kao, and K.Y.Huang, Oct. (1983) “An Analysis of Improved Fuel Design Concept for Taiwan Research Reactor,“the International Symposium on the Use and Development of Low and Medium Flux Research Reactors, MIT, USA.
4.G.P.Yu, W.E.Wang, and M.J.Her, Oct (1983)“Post-Performance of the Taiwan Research Reactor Fuel Rods,” the International Symposium on the Use and Development of Low and Medium Flux Research Reactors, MIT, USA.
5.H.P.Chou, B.S.Pei, C.C.Chieng, G.P.Yu, C.K.Shih, Oct .(1984) “RETRAN-02 Small Break LOCA Analysis on Recirculation Line of Chinshan Nuclear Power Plant,“ presented at the International Nuclear Power Plant Thermal Hydraulics and Operations Topical Meeting, Taipei,Taiwan, ROC. pp.A10-1.
6.G.P.Yu, B.S.Pei, H.P.Chou, C.C.Chieng and R.Y.Yuann,April (1986) “Postulated Small Break LOCA Analysis of Chinshan Unit 1on SORV and HPCI Steam Line Break,“ Proc. of 2nd Int. Top Mtg on Nuclear Power Plant Thermal Hydraulics and Operations, Tokyo, Japan.pp.182-189.
7.G.P.Yu, C.S.Li, S.C.Lin and Y.S.Yu, (1986) “Influence of Chernobyl Accident on Nuclear Energy Policies of the World,“ Proc.Conf. on Energy Economics, Taiwan, ROC. pp.296-309.
8.C.H.Tsai, J.J.Kai, G.P.Yu, and S.S.Hsu, Sep. (1987) “On the Critical Chromium Concentration of Inconel 600 in Different Test Methods,“ 3rd Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, Traverse City, MI, USA.
9.喻冀平, 白寶實, 馬殷邦, 楊淑瑛, 09 (1987)“調整核反應器跳機設定值以減少跳機事件之研究,”七十六年研究計畫成果討論會, 原委會, 台北, 中華民國。
10. 喻冀平, 潘欽, 李四海, 楊昭義, 02 (1987) “新型反應器研究, ”中華民國核能學會七十六年年會暨核能技術研討會論文集, 台北, 中華民國。
11. H.C.Yao, G.P.Yu, April (1988) “The Relation Between the Resistance of IGA and IGSCC and Chromium Depletion of Inconel 690,“1988 Annual Mtg of China Material Sci. and Eng. Society, Taiwan, ROC.
12. S.C.Tsai, C.H.Tsai, G.P.Yu, April (1988) “The Electrochemical Behavior and Stress Corrosion Cracking Susceptibility of Inconel 600 in Thiosulfate and Tetrathionate Solutions,“ 1988 Annual Mtg of China Material Sci. and Eng. Society, Taiwan, ROC.
13. B.S.Pei, G.P.Yu, J.C.Kang and R.Y.Yuann, Dec (1988)“Analysis of the Maanshan Unit 2 Turbine Trip Transient Using RELAP5/MOD2 and RETRAN-02/MOD2 Codes,“ Proc. of the Third Int. Top. Mtg on Nuclear Power Plant Thermal Hydraulics and Operations, Seoul, Korea.PA5-10-A5-16.
14. G.P.Yu, B.S.Pei and Y.P.Ma, Dec (1988) “Reducing Scram Frequency by Modifying /Eliminating Reactor Trip Setpoints of Maanshan Nuclear Power Station,“ Proc. of Third Int. Top. Mtg on Nuclear PowerPlant Thermalhydraulics and Operations, Seoul, Korea, PB2-13-B2-20.
15.喻冀平, 白寶實, 馬殷邦, 12 (1988)“調整核反應器跳機設定值以減少跳機事故之研究,”七十七年研究發展計畫成果討論會, 原委會, 台北, 中華民國。
16. 曹中亞, 喻冀平, 12 (1988)“因可涅爾合金六００應力腐蝕裂縫之研究,”七十七年研究發展計畫成果討論會, 原委會, 台北, 中華民國。
17. G.P.Yu, B.S.Pei, K.W.Chou, and H.L.Chang, Sep. (1989)“Analysis of Corrosion-Erosion in the Steam Extraction Lines of Nuclear Power Plants,“ Workshop of 78‘s Research and Development Project of Atomic Energy Committee, Taipei, ROC. (in Chinese)
18. B.S.Pei, G.P.Yu, and G.C.Lin, Sept. (1989) “Assessment of the Safety Function for the Anticipated Transient without Trip Mitigation System Actuation Circuitry and Maanshan Nuclear Power Station,“ Workshop of 78‘s Research and Development Project of Atomic Energy Committee, Taipei, ROC. (in Chinese)
19. S.H.Li, G.P.Yu, and Y.C.Tsai, Sept. (1989) “Review Criteria of Analysis of Composition of Radioactive Waste,“ Workshop of 78‘s Research and Development Project of Atomic Energy Committee, Taipei, ROC. (in Chinese)
20. B.S.Pei, G.P.Yu, J.C.Kang, S.S.Hsu, and R.Y.Yuann, Oct.(1989) “Simulation of the Maanshan Unit 2 Full Load Rejection Transient Using RELAP5/MOD2 Code,“ Proceedings of the Fourth International Topical Meeting on Nuclear Reactor Thermal-Hydraulics,Karlsruhe, FRG., Vol.2, pp.1383-1388.
21. J.T.Ho, and G.P.Yu, April (1990) “Pitting Corrosion of Inconel 600 in Chloride and Thiosulfate Anions Solution at Low Temperature,“ 1990 Annual Meeting of China Material Science and Engineering Society, Taiwan, ROC.
22. G.P.Yu, B.S.Pei, M.Y.Lin, L.S.Kao, Sept. (1990) “Analysis of Important Design Features of An Evolutionary Advanced Pressurized Water Reactor,“ Fifth Sino-Japanese Seminar on Nuclear Safety, Taipei,ROC.
23. G.P.Yu, and Frang-Hsien Chen, Feb (1991) “Decision Analysis Used in the Preliminary Selection of An Independent Spent Fuel Storage Installation for the Taiwan Power Company,“ Waste Management ‘91,Tucson, Arizona, U.S.A.
24. M.J.Chern, G.P.Yu, March (1991) “Pitting Corrosion of Inconel in Chloride and Thiosulfate Anion Solutions at High Temperature,“ Proceedings of the 1991 Annual Conference of the Chinese Society for Material Science, Taiwan Roc. (in Chinese)
25. J.J.Kai, C.H.Tsai, and G.P.Yu, Aug. (1991) “The IGSCC,Sensitization and Microstructure Study of Inconel 600 and 690 Alloys,“Seventh International Seminars Assuring Structural Integrity of Steel Reactor Pressure Boundary Components, Smirt II post Conference Seminar, No.2, Taipei, ROC.
26.G.P.Yu, M.Y.Chang, Y.J.Wang, and D.S.C.Chu, (1992)“Nondestructive Testing of Low Level Radioactive Waste Drums for Uniaxial Compressive Strength and Free Liquid Content,“ Waste Management‘92, Tucson Arizona, U.S.A.
27.G.P.Yu, and H.S.Chao, Oct. (1992) “Preliminary Analysis of Low Level Waste Shallow Land Disposal of Taiwan,“ 1992 IEEE Nuclear Science Symposium and Medical Imaging Conference, Vol.1, No.1,pp.700-703.
28. Y.J.Wang and G.P.Yu, March (1993) “The Effects of Proton Irradiation on Pitting Corrosion Resistance of Inconel 600 in Chloride Medium at Low Temperature,“ 1993 Corrosion, New Orleans, Louisiana,USA.
29. J.T.Ho, and G.P.Yu, April (1994) “Fatigue Behavior of Alloy 600 in Sodium Chloride Solution at Room Temperature,“ Proceedings of the 4th International Topical Meeting on Nuclear Thermal Hydraulics,Operation and Safety, Taipei, Taiwan, ROC, pp.3-c-1--3-c-6.
30. Jui-Ting Ho and Ge-Ping Yu, March (1994) “Low Temperature Fatigue Behavior of Alloy 600 in Sodium Chloride Solution,“ 1994 Corrosion, Baltimore, U.S.A. paper No.134, Feb.27-March 4.
31. K.H.Liao and G.P.Yu, Sept. (1994) “Evidence for Laves Phase in Grain Boundary of Alloy 718,“ 1994 Corrosion Asia 194, Singapore.
32. Jui-Ting Ho and Ge-Ping Yu, March (1995) “Effects of Applied Potential on the Fatigue Behavior of Alloy 600 in Sodium Chloride Solution,“ Corrosion 1995, Orlando, Florida, U.S.A. paper No.414 March 26-31.
33. C.T.Chen, G.P.Yu, J.H.Huang, (1995) “Effect on substrate temperature on Ti N Thin films deposited by HCD ion plating,“ Proc.of the 1995 Annual conf. of the Chinese Soc. for Mat. Sci. Taiwan R.O.C. (in Chinese) p.8-11-8-12, 1995, 4, 30-5, 1.
34. Chiou - Ping Wang , Ge-Ping Yu , and J.H.Huang , (1996)“The Effects of Heat Treatment and Hydrogen on the SCC Behavior of Superalloy 718 ,”Corrosion 1996 , Denver , Colorado , U.S.A.page No.127 ,March 24 - 29.
35. F.S. Shieu , L.H.Cheng , Y.C.Sung , J.H.Huang , and G.P.Yu , ( 1996 ) “ Control of the Corrosion Resistance of TiN-coated AISI 304 Stainless Steel, ” Proceedings of the 1996 Annual Conference of the Chinese Corrosion Prevention Society, TaiwanR O C . ( in English )
36. F. S. Shieu , L.H. Cheng , Y. C. Sung , J.H.Huang , and G.P.Yu , ( 1996 ) “A Study of the Thickness - Dependent Microstructure of the Ion-Plated TiN on AISI 304 Stainless Steel by Engery Filter TEM ,” Proceedings of the 1996 Annual Conference of the Chinese Society for Material Science , Taiwan R O C. ( in English )
37. B. F. Chen, W. L. Pan, G.P. Yu, J.Hwang, and J.H.Huang (1998) “ On the Corro-
sion Behavior of TiN-coating AISI D2 Steel,” International Conference on
Metallurgical Coating anf Thin Films, April 27-May 1, Town and Country Hotel, San Diego, California, USA.
38. J. Y. Chen, G.P.Yu, and J.H.Huang (1999) “ The Corrosion Behavior and Ad-
hesion of Ion-plating TiN Film on AiSI 304 Steel,” International Conference on
Metallurgical Coatings and Thin Films, April 12-16, 1999, Town and Country
Hotel, San Diego, California, USA.
39. J. H. Huang, Y. P. Tsai, and G. P. Yu, (1999) “ Effect of Processing Parameters
on the Microstructure and MechanicalProperties of TiN Film on Stainless Steel by HCD ion Plating,” International Conference on MetallurgicalCoating and
Thin Films, April 12 – 16, 1999,Town and Country Hotel, San Diego, California
, USA.
40. W.C. Chou, G. P. Yu, and J.-H. Huang, (2000) “ Corrosion Behavior of TiN-Coated 304 Stainless Steel,” International Conference on Metallurgical Coatings and Thin Films, April 10 – 14, 2000,Town and Country Hotel, San Diego, California, USA.
41. J.-H. Huang, G. P. Yu, and W.C. Chou, (2000) “ Mechanical Properties of Ion-Plated TiN Films on 304 Stainless Steel,” International Conference on Metallurgical Coatings and Thin Films, April 10 – 14, 2000,Town and Country Hotel, San Diego, California, USA.
42. W.C. Chou, G. P. Yu, and J.-H. Huang, (2001) “ Corrosion Behavior of Zirconium Nitride Film Coated on 304 Stainless Steel,” International Conference on Metallurgical Coatings and Thin Films, April 30 – May 4, 2001,Town and Country Hotel, San Diego, California, USA.
43. J.-H. Huang , C.-Y Hsu, and G. P. Yu, (2001) “Effect of Substrate Bias on the Structure and Properties of Ion-Plated ZrN on Si and Stainless Steel Substrates,”
International Conference on Metallurgical Coatings and Thin Films, April 30 – May 4, 2001,Town and Country Hotel, San Diego, California, USA.
44. W.-J.Chou, J.-H. Huang , and G. P. Yu, (2001) “Bias Effect on the Ion-Plated Zirconium Nitride Film on Si (100),” International Conference on Metallurgical Coatings and Thin Films, April 30 – May 4, 2001,Town and Country Hotel, San Diego, California, USA.
45.W.-R.Gwan, G.P. Yu, and J.-H. Huang, (2001) “Stress Corrosion Cracking of Alloy X-750 Components in Water Environment,” Seminar on Water Chemistry of Nuclear Reactor Systems 2001,October 23-24,Lungtan,Taiwan, R.O.C.
46. W.-J. Chou, J.-H. Huang , and G. P. Yu,(2002)”Effect of Heat Treatment on the
Mechanical Properties of Ion Plated TiN Film,” International Conference on
Metallurgical Coatings and Thin Films, April 22-26,2002, Town and Country
Hotel, San Diego, California, USA.
47. W.-J .Chou, J.-H. Huang , and G. P. Yu,(2002)”Deposition of TiN Films On Si(100) by Unbalanced Magnetron Sputtering,” International Conference on
Metallurgical Coatings and Thin Films, April 22-26, 2002, Town and Country
Hotel, San Diego, California, USA.
48. W.-J. Chou, J.-H. Huang , and G. P. Yu,(2002)”Corrosion Behavior of Unbalanced Magnetron Sputtered TiN Films on 304 Stainless Steel,” International Conference on Metallurgical Coatings and Thin Films, April 22-26,2002,Town and Country Hotel, San Diego, California, USA.
49. H.C.Yang,G.P.Yu, and J-H.Huang,(2003)”Effect of Film Thickness on the Structure and Properties of ZrN Films Deposited on AISI 316 Stainless Steel by Ion Plating,” International Conference on Metallurgical Coatings and Thin Films, April 28-May 2,2003, Town and Country Hotel, San Diego, California, USA.
50. G.P.Yu,Y.M.Chen, and J-H.Huang, (2003)”Porosity and Corrosion of TiN-Coated Stainless Steel,” International Conference on Metallurgical Coatings and Thin Films, April 28-May 2,2003, Town and Country Hotel, San Diego, California, USA.
51. Y.M.Chen, G.P.Yu, and J-H.Huang, (2003)”The Modified Critical Passivation Current Density Method for Porosity Measurement of TiN Coating Deposited on Stainless Steel,” International Conference on Metallurgical Coatings and Thin Films, April 28-May 2,2003, Town and Country Hotel, San Diego, California, USA.
52. Y.W.Lin, J-H.Huang, and G.P.Yu, (2003)”Effect of Bias on the Structure and Properties of ZrN Thin Film By Unbalanced Magnetron Sputtering,” International Conference on Metallurgical Coatings and Thin Films, April 28-May 2,2003, Town and Country Hotel, San Diego, California, USA.
53. G.P.Yu, K.J.YU, and J.H.Huang, (2004)”Effect of Heat Treatment under Controlled Atmosphere on the Properties of TiN Film Deposited by Unbalanced
Magnetron Sputtering,” International Conference on Metallurgical Coatings and Thin Films, April 19-23, 2004, Town and Country Hotel, San Diego, California, USA.
54. J.H.Huang, H.C.Hang, and G.P.Yu (2004)”Effect of Film Thickness on the Structure and Properties ofNanocrystalline ZrN Thin Film by Ion Plating,”
International Conference on Metallurgical Coatings and Thin Films, April 19-23, 2004, Town and Country Hotel, San Diego, California, USA.
55. Yu-Wei Lin, Jia-Hong Huang, Ge-Ping Yu (2004)” The Structure and Propertiy
of ZrN Thin Film Deposited By UBM Sputtering,” The 3rd Asian Conference on Chemical Vapor Deposition,’ November 12-14, 2004,Taipei,Taiwn, ROC.
56. Jia-Hong Huang, F.-Y. Ouyang, G.P.Yu (2005)” Effect Of Film Thickness and Ti Interlayer on the Structure and Properties of nanocrystalline TiN Thin Film Deposited by Unbalanced Magnetron Sputtering,” International Conference on Metallurgical Coatings and Thin Films, May 2-6, 2005, Town and Country Hotel, San Diego, California, USA.
57. Y.-W. Lin, J.-H. Huang G.-P. Yu (2005) “The Effect of Bias on the Structure and Property of ZrN Thin Film Deposited by UBM Sputtering,” International Conference on Metallurgical Coatings and Thin Films, May 2-6, 2005, Town and Country Hotel, San Diego, California, USA.
58. Jia-Hong Huang, K.H.Chang, Ge-Ping Yu (2006)”Effect of Oxygen Flow Rate on the Structure and Properties of Nanocrystalline Zr(N,O) Thin Films Deposited by Ion Plating,” International Conference on Metallurgical Coatings and Thin Films, May 1-5, 2006, Town and Country Hotel, San Diego, California, USA.
59. S.-H.Chiu, J.H. Huang, G.-P. Yu (2006)”Synthesis and Characterization of Nanocrystalline TiNxOy Thin Films by Unbalanced Magnetron Sputtering,” International Conference on Metallurgical Coatings and Thin Films, May 1-5, 2006, Town and Country Hotel, San Diego, California, USA.
60. K.C. Lan, J.H. Huang, G.-P. Yu (2006)”Analysis of the Structure and Properties of Zr(N,O) Thin Films on Si(100) Deposited by HCD-IP Method,” International Conference on Metallurgical Coatings and Thin Films, May 1-5, 2006, Town and Country Hotel, San Diego, California, USA.
61. S. Chiu, J.H. Huang, G.-P. Yu (2006)”Oxygen Doping on the Structure and Properties of Nanocrystalline TiNxOy Thin Film,” International Conference on Metallurgical Coatings and Thin Films, May 1-5, 2006, Town and Country Hotel, San Diego, California, USA.